View source for Release Notes

{{TOClimit|2}}
=ThinManager=
==ThinManager 14.0==
===Service Pack 1 - 10/21/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||14001
|-
| ThinServer||14001
|-
| TermCap2||14.0.118
|}

ThinManager
::1. Fixed saving of new events
::2. Fixed memory leak in AD sync account dialog

ThinServer
::1. Fixed new events not being run until restarting service
::2. Fixed display client override credentials not being saved correctly from terminal endpoint
::3. Fixed missing auth requirements and methods from terminal and user endpoint
::4. Fixed missing hotkey and permissions from terminal endpoint
::5. Fixed system config endpoint failing for most updates
::6. Fixed updates run on replica server endpoints not being replicated
::7. Fixed issue with API keys not being replicated 

ThinManager Web
::1. Fixed startup error related to required SIMD support

===Initial Release - 5/22/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||14000
|-
| ThinServer||14000
|-
| TermCap2||14.0.116
|}

ThinManager
::1. Added initial ThinManager web user interface
::2. Added internally generated ThinManager Events
::3. Added settings to disable ThinManager Events
::4. Added option for maximum session time for ThinManager Users
::5. Added option to enable/disable VNC clipboard
::6. Updated wizards to be completed if AD users cannot be verified
::7. Updated wizards to be completed without credentials if they would not be used
::8. Updated VLC libraries
::9. Fixed icon displayed for containers with an override

ThinServer
::1. Added support for Syslog RFC5424 format
::2. Added https server config file for advanced configuration
::3. Added DisableDeviceAuthentication registry entry
::4. Updated API endpoints and data models to better support the web UI
::5. Updated FTA client library version to 7.14.00.0004
::6. Fixed license permission enforcement for FTA licenses
::7. Fixed user synchronization for multiple OUs when moving users between Ous
::8. Fixed EnableAPI registry setting for synchronized systems
::9. Fixed synchronization of firmware in some circumstances where package exists only on one ThinServer

Installer
::1. Added support for InstallDrive and InstallLocation command line properties
::2. Added option to disable device authentication
::3. Updated to FTAM 5.01.01


==ThinManager 13.2==
===Service Pack 3 - 10/21/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13073
|-
| ThinServer||13073
|-
| TermCap2||14.0.118
|}

::1. Fixed CVE-2024-10386 unauthenticated SQL
::2. Fixed CVE-2024-10387 ThinServer crash

===Service Pack 2 - 6/19/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13072
|-
| ThinServer||13072
|-
| TermCap2||14.0.116
|}

ThinManager
::1. Fixed retry when setting terminal login for AD user
::2. Fixed potential crash during tree updates when selected terminal is restarted
::3. Fixed potential freeze in terminal override dialog

ThinServer
::1. Fixed multiple Organizational Unit AD synchronization
::2. Fixed container files not being cleaned up if installation fails
::3. Fixed licensing permissions for FTA licensing mode
::4. Fixed API not responding when requesting an endpoint returning system schedule data for certain configurations
::5. Fixed potential crash when starting/stopping HTTPS server multiple times in quick succession 

===Service Pack 1 - 3/6/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13071
|-
| ThinServer||13071
|-
| TermCap2||13.2.100
|}

ThinManager
::1. Updated terminal wizard to allow finish without credentials if the credentials are not needed
::2. Fixed connection status of a terminal hosted container
::3. Fixed display after logging is disabled
::4. Fixed icon of a container display client with overrides

ThinServer
::1. Updated to legacy boot loader 2.6, fixes IP address display of the current ThinManager server
::2. Fixed error in firmware synchronization
::3. Fixed display client override credentials not being saved correctly when set via API
::4. Fixed API documentation for /system/licensing/tma/license POST endpoint
::5. Fixed API documentation for /system/licensing/fta/licenses POST endpoint
::6. Fixed system/licensing/mode endpoints not functioning as expected for some configurations
::7. Fixed crash when requesting system config endpoint for configurations with non-system events defined
::8. Fixed potential crash during HTTP server restart

===Initial Release - 9/20/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13070
|-
| ThinServer||13070
|-
| TermCap2||13.2.100
|-
| Package 9.3||13.2.0-9.3
|-
| Package 9.2||13.2.0-9.2
|-
| Package 8.2||13.2.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added Device Authentication (See note below)
::2. Added option to provide a certificate to authenticate synchronization connection
::3. Added option to specify whether signed or unsigned containers are allowed
::4. Added preload container images setting
::5. Added logon timeout option for ThinManager User logins
::6. Added RDS server core count to terminal server properties tab
::7. Added login requirements and methods to user configuration tab
::8. Fixed API key expiration date not displaying properly for dates after 2038
::9. Fixed group not being automatically populated when creating a new item within a group
::10. Fixed hotkey group setting when no hotkeys are defined
::11. Fixed automatic refreshing of the terminal summary tab
::12. Fixed dialog to reflect inheritance of container settings

ThinServer
::1. Added support for firmware packages that support Secure Boot
::2. Added support for firmware packages that support wireless thin clients
::3. Added additional logging for TFTP failures due to packet size
::4. Added additional logging when ThinServer can't write to the registry
::5. Updated logging for HTTPS server
::6. Updated HTTPS timeouts
::7. Updated default Active Directory synchronization interval
::8. Updated the max number of concurrent connections to HTTPS server
::9. Fixed copying Display Client having the wrong parent
::10. Fixed database password handling for scheduled backups
::11. Fixed PXE server DHCP ARP check performance issue
::12. Fixed URL encoding issue for certain API requests
::13. Fixed preloaded container images being sent twice in certain configurations
::14. Fixed terminal restart required icon erroneously on terminal after terminal replacement

-----
Note: Device Authentication is enabled by default.  On 13.2 and newer firmware and ThinManager clients, this will cause the terminal to prompt for credentials on at least the first boot.  This behavior can be changed on the Terminal Authentication page of the ThinManager Server Configuration Wizard.
-----

==ThinManager 13.1==
===Service Pack 4 - 10/21/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13054
|-
| ThinServer||13054
|-
| TermCap2||14.0.118
|}

::1. Fixed CVE-2024-10386 unauthenticated SQL
::2. Fixed CVE-2024-10387 ThinServer crash

===Service Pack 3 - 6/19/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13053
|-
| ThinServer||13053
|-
| TermCap2||14.0.116
|}

ThinManager
::1. Add option to specify TLS certificate to use for synchronization

ThinServer
::1. Fixed multiple Organizational Unit AD synchronization
::2. Fixed container files not being cleaned up if installation fails
::3. Fixed licensing permissions for FTA licensing mode
::4. Fixed API not responding when requesting an endpoint returning system schedule data for certain configurations
::5. Fixed potential crash when starting/stopping HTTPS server multiple times in quick succession

===Service Pack 2 - 3/6/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13052
|-
| ThinServer||13052
|-
| TermCap2||13.2.100
|}

ThinManager
::1. Fixed connection status of a terminal hosted container
::2. Fixed camera URL not being escaped correctly

ThinServer
::1. Updated to legacy boot loader 2.6, fixes IP address display of the current ThinManager server
::2. Fixed several log entries
::3. Fixed reading of the AD sync time when changed in the UI
::4. Fixed error in firmware synchronization
::5. Fixed permission check for some event tables
::6. Fixed terminal configuration being unintentionally flagged as changed for certain video mode changes
::7. Fixed display client override credentials not being saved correctly when set via API
::8. Fixed API documentation for /system/licensing/tma/license POST endpoint
::9. Fixed API documentation for /system/licensing/fta/licenses POST endpoint
::10. Fixed system/licensing/mode endpoints not functioning as expected for some configurations
::11. Fixed crash when requesting system config endpoint for configurations with non-system events defined
::12. Fixed potential crash during HTTP server restart

===Service Pack 1 - 6/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13051
|-
| ThinServer||13051
|-
| TermCap2||13.1.91
|}

ThinManager
::1. Added login requirements and login methods to the terminal configuration tab
::2. Fixed potential crash during item deletion
::3. Fixed terminal summary tab not refreshing automatically

ThinServer
::1. Fixed CVE-2023-2913 API path traversal
::2. Fixed CVE-2023-2914 buffer overflow
::3. Fixed CVE-2023-2915 file deletion
::4. Fixed CVE-2023-2917 file upload
::5. Fixed potential crash during synchronization
::6. Fixed resource leak in terminal monitor connection
::7. Fixed copying a Display Client to be in the same group as the original
::8. Fixed resource leak in TFTP error handling
::9. Fixed deletion of ThinManager Events not removing all relevant data
::10. Fixed database password handling for certain workflows

===Initial Release - 2/2/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13050
|-
| ThinServer||13050
|-
| TermCap2||13.1.89
|-
| Package 9.3||13.1.0-9.3
|-
| Package 9.2||13.1.0-9.2
|-
| Package 8.2||13.1.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added e-signature process
::2. Added indication of signed container images
::3. Added event sub-type to support Logix PinPoint events

ThinServer
::1. Added support for HTTPS boot
::2. Added API properties for package bootloader, disabling TFTP, and event sub-type
::3. Updated database restore to include DHCP leases
::4. Updated HTTPS server supported cipher list
::5. Updated FTA client version to 7.11
::6. Updated Docker manager to ignore non-ThinManager container images 
::7. Improved logging for biometric database
::8. Fixed high memory utilization when transferring container images
::9. Fixed HTTPS server allowing TLS negotiation below 1.2
::10. Fixed crash when HTTPS server is unable to bind to port at startup
::11. Fixed terminal status API endpoint always returning down
::12. Fixed memory leak related to caching of bootloader
::13. Fixed restoring biometric database backup with blank password
::14. Fixed issue with display names that prevented legacy firmware from getting a configuration
::15. Fixed crash when loading an unknown non-ThinManager container image
::16. Fixed boot loop for certain client configurations using package 9.2 or 9.3
::17. Fixed video module download error for legacy thin clients

==ThinManager 13.0==
===Service Pack 6 - 10/21/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13006
|-
| ThinServer||13006
|-
| TermCap2||14.0.118
|}

ThinServer
::1. Fixed CVE-2024-10386 unauthenticated SQL
::2. Fixed CVE-2024-10387 ThinServer crash

===Service Pack 5 - 6/19/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13005
|-
| ThinServer||13005
|-
| TermCap2||14.0.116
|}

ThinServer
::1. Fixed multiple Organizational Unit AD synchronization
::2. Fixed container files not being cleaned up if installation fails
::3. Fixed licensing permissions for FTA licensing mode
::4. Fixed API not responding when requesting an endpoint returning system schedule data for certain configurations
::5. Fixed potential crash when starting/stopping HTTPS server multiple times in quick succession

===Service Pack 4 - 3/6/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13004
|-
| ThinServer||13004
|-
| TermCap2||13.2.100
|}

ThinServer
::1. Updated to legacy boot loader 2.6, fixes IP address display of the current ThinManager server
::2. Fixed several log entries
::3. Fixed error in firmware synchronization
::4. Fixed permission check for some event tables
::5. Fixed display client override credentials not being saved correctly when set via API
::6. Fixed API documentation for /system/licensing/tma/license POST endpoint
::7. Fixed API documentation for /system/licensing/fta/licenses POST endpoint
::8. Fixed system/licensing/mode endpoints not functioning as expected for some configurations
::9. Fixed crash when requesting system config endpoint for configurations with non-system events defined
::10. Fixed potential crash during HTTP server restart

===Service Pack 3 - 6/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13003
|-
| ThinServer||13003
|-
| TermCap2||13.1.91
|}

ThinManager
::1. Fixed potential crash during item deletion

ThinServer
::1. Fixed CVE-2023-2913 API path traversal
::2. Fixed CVE-2023-2914 buffer overflow
::3. Fixed CVE-2023-2915 file deletion
::4. Fixed CVE-2023-2917 file upload
::5. Fixed potential crash during synchronization
::6. Fixed resource leak in terminal monitor connection
::7. Fixed copying a Display Client to be in the same group as the original

===Service Pack 2 - 3/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13002
|-
| ThinServer||13002
|-
| TermCap2||13.0.89
|}

ThinManager
::1. Fixed system config schedule not displaying filename field
::2. Fixed login methods and login requirements inheritance
::3. Fixed login methods storage during terminal creation
::4. Fixed terminal summary tab not always auto-refreshing
::5. Fixed hotkey inheritance

ThinServer
::1. Fixed CVE 2023-27855 ThinServer Path Traversal Upload
::2. Fixed CVE 2023-27856 ThinServer Path Traversal Download
::3. Fixed CVE 2023-27857 ThinServer Heap-Based Buffer Overflow
::4. Fixed DHCP Leases not being included in database restores
::5. Fixed MultiMonitor integrity check
::6. Fixed memory leak during file replacement in file cache
::7. Fixed manual database password change always failing
::8. Fixed HTTPS server allowing negotiation below TLS1.2
::9. Fixed terminal config that caused legacy firmware packages to request a video module that does not exist
::10. Fixed Display Client configuration for legacy firmware packages
::11. Fixed handling usernames with apostrophes
::12. Re-write synchronization check algorithm

===Service Pack 1 - 8/19/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13001
|-
| ThinServer||13001
|-
| TermCap2||13.0.74
|}

ThinManager
::1. Updated Display Client config tab to include delayed start until user present property

ThinServer
::1. Added log message when DCOMAuthLevel registry value is set too low
::2. Added IgnoreDCOMAuthLevel registry value
::3. Improved startup process when current database password is unknown
::4. Updated max database cache size to improve performance for very large configurations
::5. Updated event permissions to be part of the Administrators group
::6. Updated HTTPS server response time limit to better support larger file transfers
::7. Updated HTTPS server to save self-signed certificate to reuse when user supplied certificate is present
::8. Updated HTTPS server self-signed certificate to include subject alternative names for localhost
::9. Updated containers to use the client hostname
::10. Fixed CVE-2022-38742 ThinServer Heap-Based Overflow
::11. Fixed command line options not being sent for user and location Display Clients
::12. Fixed terminal commands issued through the API being case-sensitive
::13. Fixed change to Display Client event when the Display Client has a display name
::14. Fixed potential deadlock in container startup
::15. Fixed firmware package backup process
::16. Fixed crash related to HTTPS server startup during synchronization

===Initial Release - 5/23/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||13000
|-
| ThinServer||13000
|-
| TermCap2||13.0.63
|-
| Package 9.3||13.0.0-9.3
|-
| Package 9.2||13.0.0-9.2
|-
| Package 8.2||13.0.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added event-based content system
::2. Added REST API
::3. Added option to specify RDP port range for container hosts
::4. Added predefined layouts for virtual screen display clients
::5. Added method to save cookies from Chrome containers
::6. Updated help format to HTML-based context sensitive

ThinServer
::1. Added support for specifying multi-monitor setup at group
::2. Improved licensing error messages sent to ThinManager
::3. Updated creating custom variable from ActiveX as hidden unless specified
::4. Fixed calculation of virtual screen resolution
::5. Fixed "set keyboard focus to a screen" hotkey
::6. Fixed DHCP Leases not being included in database restores.

==ThinManager 12.1==
===Service Pack 7 - 6/23/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12057
|-
| ThinServer||12057
|-
| TermCap2||13.1.91
|-
| Package 9.2||12.1.4-9.2
|-
| Package 9.1||12.1.4-9.1
|-
| Package 9.0||12.1.4-9.0
|-
| Package 8.2||12.1.4-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed CVE-2023-2914 buffer overflow
::2. Fixed CVE-2023-2915 file deletion
::3. Fixed CVE-2023-2917 file upload
::4. Fixed potential crash during synchronization
::5. Fixed resource leak in terminal monitor connection
::6. Fixed copying a Display Client to be in the same group as the original
::7. Fixed deletion of ThinManager Events not removing all relevant data
::8. Fixed database password handling for certain workflows

===Service Pack 6 - 3/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12056
|-
| ThinServer||12056
|-
| TermCap2||13.0.89
|-
| Package 9.2||12.1.4-9.2
|-
| Package 9.1||12.1.4-9.1
|-
| Package 9.0||12.1.4-9.0
|-
| Package 8.2||12.1.4-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed potential crash during close of ThinManager
::2. Fixed grouping of card "always prompt for password" setting

ThinServer
::1. Fixed CVE 2023-27855 ThinServer Path Traversal Upload
::2. Fixed CVE 2023-27856 ThinServer Path Traversal Download
::3. Fixed CVE 2023-27857 ThinServer Heap-Based Buffer Overflow
::4. Fixed DHCP Leases not being included in database restores
::5. Fixed MultiMonitor integrity check
::6. Fixed memory leak during file replacement in file cache
::7. Fixed manual database password change always failing
::8. Fixed memory leak in monitor connection

===Service Pack 5 - 9/16/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12055
|-
| ThinServer||12055
|-
| TermCap2||13.0.75
|-
| Package 9.2||12.1.4-9.2
|-
| Package 9.1||12.1.4-9.1
|-
| Package 9.0||12.1.4-9.0
|-
| Package 8.2||12.1.4-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Added IgnoreDCOMAuthLevel registry value
::2. Fixed legacy clients requesting video2 modules instead of video

Installer
::1. Fixed VLC libraries not being included; Fixed view tab for camera display servers in ThinManager

===Service Pack 4 - 7/19/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12054
|-
| ThinServer||12054
|-
| TermCap2||13.0.68
|-
| Package 9.2||12.1.4-9.2
|-
| Package 9.1||12.1.4-9.1
|-
| Package 9.0||12.1.4-9.0
|-
| Package 8.2||12.1.4-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Added log message when DCOMAuthLevel registry value is set too low
::2. Improved startup process when current database password is unknown
::3. Updated max database cache size to improve performance for very large configurations
::4. Updated custom variable handling to allow hiding of the custom variable received via the ActiveX
::5. Updated OpenSSL to address CVE-2022-0778
::6. Fixed CVE-2022-38742 ThinServer Heap-Based Overflow
::7. Fixed integrity check changing color depth for special TMC video modes
::8. Fixed virtual screen resolution calculation

===Service Pack 3 - 4/4/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12053
|-
| ThinServer||12053
|-
| TermCap2||12.1.60
|-
| Package 9.2||12.1.4-9.2
|-
| Package 9.1||12.1.4-9.1
|-
| Package 9.0||12.1.4-9.0
|-
| Package 8.2||12.1.4-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::2. Removed terminal status from the Display Clients tree

ThinServer
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::2. Fixed pin validation when using group settings

===Service Pack 2 - 2/16/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12052
|-
| ThinServer||12052
|-
| TermCap2||12.1.57
|-
| Package 9.2||12.1.3-9.2
|-
| Package 9.1||12.1.3-9.1
|-
| Package 9.0||12.1.3-9.0
|-
| Package 8.2||12.1.3-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Updated COM/DCOM security level
::2. Fixed editing of DHCP range options
::3. Fixed inheritance of Windows username for Relevance Users
::4. Fixed validation of resolver data entry for GPS resolvers
::5. Fixed application crash in AD user search location selection

ThinServer
::1. Added support for read-only domain controllers
::2. Added additional FTA logging
::3. Updated COM/DCOM security level
::4. Updated DHCP server to use the broadcast flag value sent by client
::5. Fixed FTA licensing for View SE consuming duplicate licenses
::6. Fixed minor memory leaks
::7. Fixed multimonitor validation to verify all monitors are set to the same color depth
::8. Fixed handling of special characters in URL for browser containers

===Service Pack 1 - 9/14/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12051
|-
| ThinServer||12051
|-
| TermCap2||12.1.45
|-
| Package 9.2||12.1.1-9.2
|-
| Package 9.1||12.1.1-9.1
|-
| Package 9.0||12.1.1-9.0
|-
| Package 8.2||12.1.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added copy/save for CA cert
::2. Fixed saving of CA cert
::3. Fixed current password field being shown when not required when changing the database password

ThinServer
::1. Fixed TermCap also being encrypted when updating main database encryption
::2. Fixed URL encoding of '-', '&', and ';' for container display clients 
::3. Fixed autologin setting for containers
::4. Fixed a SmartSession logging message
::5. Fixed Auto and Native video modes for aTMC and iTMC

===Initial Release - 6/18/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12050
|-
| ThinServer||12050
|-
| TermCap2||12.1.43
|-
| Package 9.2||12.1.0-9.2
|-
| Package 9.1||12.1.0-9.1
|-
| Package 9.0||12.1.0-9.0
|-
| Package 8.2||12.1.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added reset of SmartSession connection
::2. Added allow user to change the db password
::3. Added allow user to run "vacuum" on the database
::4. Added setting to force changing the database password
::5. Updated handling of backup/restore of biometric database similar to the main database
::6. Removed limits on resolution in terminal overrides
::7. Fixed duplicate container name check

ThinServer
::1. Added support for running containers on a thinclient
::2. Added updating of an expired AD password from terminal
::3. Added HTTPS server for downloading containers
::4. Added support of logging to a syslog server
::5. Updated DHCP lease when a terminal is deleted

==ThinManager 12.0==
===Service Pack 6 - 6/23/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12008
|-
| ThinServer||12008
|-
| TermCap2||13.1.91
|-
| Package 9.2||12.0.4-9.2
|-
| Package 9.1||12.0.4-9.1
|-
| Package 9.0||12.0.4-9.0
|-
| Package 8.2||12.0.4-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed potential crash during item deletion
::2. Fixed terminal summary tab not refreshing automatically

ThinServer
::1. Fixed CVE-2023-2914 buffer overflow
::2. Fixed CVE-2023-2915 file deletion
::3. Fixed CVE-2023-2917 file upload
::4. Fixed potential crash during synchronization
::5. Fixed resource leak in terminal monitor connection

===Service Pack 5 - 3/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12007
|-
| ThinServer||12007
|-
| TermCap2||13.0.89
|-
| Package 9.2||12.0.4-9.2
|-
| Package 9.1||12.0.4-9.1
|-
| Package 9.0||12.0.4-9.0
|-
| Package 8.2||12.0.4-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed CVE 2023-27855 ThinServer Path Traversal Upload
::2. Fixed CVE 2023-27856 ThinServer Path Traversal Download
::3. Fixed CVE 2023-27857 ThinServer Heap-Based Buffer Overflow
::4. Fixed DHCP Leases not being included in database restores
::5. Fixed MultiMonitor integrity check
::6. Fixed memory leak during file replacement in file cache
::7. Fixed manual database password change always failing

===Service Pack 4 - 9/16/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12006
|-
| ThinServer||12006
|-
| TermCap2||13.0.75
|-
| Package 9.2||12.0.4-9.2
|-
| Package 9.1||12.0.4-9.1
|-
| Package 9.0||12.0.4-9.0
|-
| Package 8.2||12.0.4-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Added IgnoreDCOMAuthLevel registry value
::2. Fixed legacy clients requesting video2 modules instead of video

Installer
::1. Fixed VLC libraries not being included; Fixed view tab for camera display servers in ThinManager

===Service Pack 3 - 7/19/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12005
|-
| ThinServer||12005
|-
| TermCap2||13.0.68
|-
| Package 9.2||12.0.4-9.2
|-
| Package 9.1||12.0.4-9.1
|-
| Package 9.0||12.0.4-9.0
|-
| Package 8.2||12.0.4-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::2. Removed terminal status from the Display Clients tree

ThinServer
::1. Improved startup process when current database password is unknown
::2. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::3. Updated max database cache size to improve performance for very large configurations
::4. Updated custom variable handling to allow hiding of the custom variable received via the ActiveX
::5. Updated OpenSSL to address CVE-2022-0778
::6. Fixed CVE-2022-38742 ThinServer Heap-Based Overflow

===Service Pack 2 - 6/18/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12004
|-
| ThinServer||12004
|-
| TermCap2||12.1.43
|-
| Package 9.2||12.0.4-9.2
|-
| Package 9.1||12.0.4-9.1
|-
| Package 9.0||12.0.4-9.0
|-
| Package 8.2||12.0.4-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added ability to unlock a user that is locked because of login failures
::2. Updated maximum connection timeout to 300 seconds from 60 seconds
::3. Fixed connection to remote ThinManager Servers
::4. Fixed handling of hotkey configuration when specified at the group level
::5. Fixed tree representation of workstation display client applied to a virtual screen

ThinServer
::1. Added updating of an expired AD password from terminal
::2. Updated login method to manual when typing in a badge number
::3. Fixed copying authentication methods and requirements when copying a terminal, user, or location
::4. Fixed database upgrade for authentication requirements
::5. Fixed installation of a democode on a synchronized system
::6. Fixed synchronization timestamp for non-US locales
::7. Fixed duplicate FTA licenses not being released after synchronization
::8. Fixed counting of Relevance login failures
::9. Fixed database upgrade from blowfish to AES
::10. Fixed syncing of report files
::11. Fixed potential crash due to stalled DHCP threads

===Service Pack 1 - 2/1/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12001
|-
| ThinServer||12001
|-
| TermCap2||12.0.31
|-
| Package 9.2||12.0.1-9.2
|-
| Package 9.1||12.0.1-9.1
|-
| Package 9.0||12.0.1-9.0
|-
| Package 8.2||12.0.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed color depth selection when overriding a display client
::2. Fixed Login Requirements/Methods being shown for group nodes when not set as a group setting
::3. Fixed initial tree state for Display Clients on a virtual screen
::4. Fixed video mode display on the terminal configuration tab

ThinServer
::1. Added additional Active directory logging
::2. Fixed multi-monitor configuration when resolutions do not match between monitors
::3. Fixed the initial program value when a override exists
::4. Fixed serial port configuration not being sent to terminal as part of configuration
::5. Fixed Relevance account lockoutFixed terminal changed indicator
::6. Fixed handling of AD security groups and organizational units with fewer than 2 members
::7. Fixed AD sync with external domain trusts

===Initial Release - 12/11/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||12000
|-
| ThinServer||12000
|-
| TermCap2||12.0.29
|-
| Package 9.2||12.0.0-9.2
|-
| Package 9.1||12.0.0-9.1
|-
| Package 9.0||12.0.0-9.0
|-
| Package 8.2||12.0.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added support for docker container Display Clients (Firefox browser, Linux terminal)
::2. Added Relevance User allowed login methods and login requirements per user, terminal, and location
::3. Added filtering of Display Client and Display Server list during selection
::4. Added View tab for IP cameras to connect directly to the camera stream for testing
::5. Added terminal authentication for the Connect tab on RDS servers when selected from the terminal tree
::6. Added Relevance User login/logout report
::7. Added asset management report
::8. Improved TermCap database format (TermCap2)
::9. Improved hotkey configuration

ThinServer
::1. Added assignment of unknown badge at terminal during user login
::2. Fixed copying of secondary MAC when terminal is copied
::3. Fixed initial screen property on delay start display clients
::4. Fixed AD sync interval setting
::5. Fixed RD Gateway server settings check at boot time when no longer using an RD gateway

Installer
::1. Updated included FactoryTalk Activation Manager, includes CodeMeter 7.10a

==ThinManager 11.2==
===Service Pack 8 - 6/23/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11208
|-
| ThinServer||11088
|-
| TermCap||9.13.1.91
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed terminal summary tab not refreshing automatically

ThinServer
::1. Fixed CVE-2023-2914 buffer overflow
::2. Fixed CVE-2023-2915 file deletion
::3. Fixed CVE-2023-2917 file upload
::4. Fixed resource leak in terminal monitor connection

===Service Pack 7 - 3/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11207
|-
| ThinServer||11087
|-
| TermCap||9.13.0.89
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed CVE 2023-27855 ThinServer Path Traversal Upload
::2. Fixed CVE 2023-27856 ThinServer Path Traversal Download
::3. Fixed CVE 2023-27857 ThinServer Heap-Based Buffer Overflow
::4. Fixed DHCP Leases not being included in database restores
::5. Fixed MultiMonitor integrity check

===Service Pack 6 - 8/5/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11206
|-
| ThinServer||11086
|-
| TermCap||9.13.0.73
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Removed terminal status from the Display Clients tree

ThinServer
::1. Added IgnoreDCOMAuthLevel registry value
::2. Improved startup process when current database password is unknown
::3. Fixed CVE-2022-38742 ThinServer Heap-Based Overflow
::4. Fixed user PIN validation not honoring group settings

===Service Pack 5 - 4/4/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11205
|-
| ThinServer||11085
|-
| TermCap||9.0.40
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::2. Fixed app crash during selection of Active Directory location

ThinServer
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel

===Service Pack 4 - 3/1/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11204
|-
| ThinServer||11084
|-
| TermCap||9.0.40
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Updated COM/DCOM security level
::2. Fixed Active Directory password rotation setting
::3. Fixed remote ThinServer connections

ThinServer
::1. Updated COM/DCOM security level
::2. Updated DHCP server to use the broadcast flag value sent by client
::3. Fixed demo code installation
::4. Fixed synchronization timestamp for non-US English installations
::5. Fixed minor memory leaks

===Service Pack 3 - 2/1/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11203
|-
| ThinServer||11083
|-
| TermCap||9.0.40
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed initial tree state for Display Clients on a virtual screen
::2. Fixed update to display client and display server tree when a terminal is deleted
::3. Fixed editing of the AD sync interval setting

ThinServer
::1. Added additional Active directory logging
::2. Fixed handling of AD security groups and organizational units with fewer than 2 members
::3. Fixed AD sync with external domain trusts

===Service Pack 2 - 11/20/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11202
|-
| ThinServer||11082
|-
| TermCap||9.0.39
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed UI lockup in terminal-to-terminal shadow wizard

ThinServer
::1. Updated FTA client library to fix issue on Stratus server during failover
::2. Improved FTA license counts for entries with the same serial number
::3. Fixed possible crash when FTA logging is enabled

Installer
::1. Updated included FactoryTalk Activation Manager, includes CodeMeter 7.10a

===Service Pack 1 - 6/10/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11201
|-
| ThinServer||11081
|-
| TermCap||9.0.34
|-
| Package 9.1||11.2.0-9.1
|-
| Package 9.0||11.2.0-9.0
|-
| Package 8.2||11.2.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed application hang when configuring terminal shadow Display Clients
::2. Fixed Relevance User wizard potentially not showing the last two configuration pages

ThinServer
::1. Improved FTA license error handling
::2. Fixed FTA license usage after synchronization

Installer
::1. Fixed TMMaster.lic and FTALicense.txt not being copied to ProgramData during an upgrade

===Initial Release - 5/29/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11200
|-
| ThinServer||11080
|-
| TermCap||9.0.34
|-
| Package 9.1||11.2.0-9.1
|-
| Package 9.0||11.2.0-9.0
|-
| Package 8.2||11.2.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added support for portrait monitor layout for supported hardware
::2. Added TLS to security type negotiation for terminal shadow and VNC connections
::3. Added graphical free-form configuration of virtual screens and camera overlays
::4. Added event notification for license events
::5. Added check for DNS support being enabled when using RD Gateway
::6. Fixed potential crash when active ThinManaer server is removed

ThinServer
::1. Updated configuration database to use AES encryption
::2. Updated firmware package, boot loaders, and databases location to program data
::3. Fixed handling of default location when monitor connection lost on terminal currently logged in to location
::4. Fixed module support check for aTMC, iTMC and WinTMC terminals
::5. Fixed incorrect generation of camera url when no port is specified
::6. Fix including option 66 when requested by the DHCP client

==ThinManager 11.1==
===Service Pack 7 - 6/23/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11107
|-
| ThinServer||11059
|-
| TermCap||9.13.1.91
|-
| Package 9.0||11.1.7-9.0
|-
| Package 8.2||11.1.7-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed CVE-2023-2914 buffer overflow
::2. Fixed CVE-2023-2915 file deletion
::3. Fixed CVE-2023-2917 file upload
::4. Fixed resource leak in terminal monitor connection

===Service Pack 6 - 3/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11106
|-
| ThinServer||11058
|-
| TermCap||9.13.0.89
|-
| Package 9.0||11.1.7-9.0
|-
| Package 8.2||11.1.7-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed CVE 2023-27855 ThinServer Path Traversal Upload
::2. Fixed CVE 2023-27856 ThinServer Path Traversal Download
::3. Fixed CVE 2023-27857 ThinServer Heap-Based Buffer Overflow
::4. Fixed DHCP Leases not being included in database restores
::5. Fixed minor memory leak in DHCP server
::6. Fixed DHCP range check
::7. Fixed MultiMonitor integrity check

===Service Pack 5 - 8/5/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11105
|-
| ThinServer||11057
|-
| TermCap||9.13.0.73
|-
| Package 9.0||11.1.7-9.0
|-
| Package 8.2||11.1.7-8.2
|-
| Package 5||5.0.5
|}

ThinServer
::1. Added IgnoreDCOMAuthLevel registry value
::2. Improved startup performance by not accepting monitor connections during initialization
::3. Fixed CVE-2022-38742 ThinServer Heap-Based Overflow

===Service Pack 4 - 5/6/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11104
|-
| ThinServer||11056
|-
| TermCap||9.0.37
|-
| Package 9.0||11.1.7-9.0
|-
| Package 8.2||11.1.7-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::2. Removed terminal status from the Display Clients tree

ThinServer
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::2. Updated DHCP server to use the broadcast flag value sent by client
::3. Updated custom variable handling to allow hiding of the custom variable received via the ActiveX
::4. Fixed scheduled reports not being generated

===Service Pack 3 - 8/14/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11103
|-
| ThinServer||11055
|-
| TermCap||9.0.37
|-
| Package 9.0||11.1.7-9.0
|-
| Package 8.2||11.1.7-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Improved terminal to terminal shadow wizard to limit the selection of screens to appropriate screens
::2. Fixed ThinManager crash when you remove the active ThinManager server.
::3. Fixed "maintain aspect ratio" item display on RDS Display Client config tab
::4. Fixed unicode issue when adding Relevance resolvers

ThinServer
::1. Removed FactoryTalk Activation as a dependency
::2. Fixed return of default location to the original terminal when monitor connection lost
::3. Fixed 64-bit boot loader not getting sent to EBC client types, RFC Errata 4578
::4. Fixed monitor thread exiting before all references are removed

===Service Pack 2 - 1/31/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11102
|-
| ThinServer||11052
|-
| TermCap||9.0.34
|-
| Package 9.0||11.1.4-9.0
|-
| Package 8.2||11.1.4-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Fixed screen summary on the terminal configuration tab
::2. Fixed event log tab display
::3. Fixed editing of scheduled events

ThinServer
::1. Fixed CSV report output file being truncated 
::2. Fixed crash when using multiple Bluetooth beacons in the same location
::3. Fixed VNC server upgrade defaulting to ThinManager VNC instead of standard VNC

===Service Pack 1 - 9/25/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11101
|-
| ThinServer||11051
|-
| TermCap||9.0.33
|-
| Package 9.0||11.1.1-9.0
|-
| Package 8.2||11.1.1-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Improved resolver data entry validation
::2. Improved handling of no selection of FTA license
::3. Fixed tiling options not being shown or saved
::4. Fixed boot priority setting for terminal groups
::5. Fixed access to prompt for pin setting
::6. Fixed access to authorization cache settings
::7. Fixed access to instant failover hotkey settings with virtual screens
::8. Fixed not being able to override username settings for workstation display clients
::9. Fixed incorrect icon being used for workstation display clients with a configuration override
::10. Removed refresh rate setting for WinTMC terminals for MultiMonitor configurations

ThinServer
::1. Added TERMINAL_IPADDRESS and TERMINAL_MACADDRESS ThinManager environment variables
::2. Added support for redundant FTA licenses (.SEC)
::3. Fixed crash when trying to use FTA licensing when FTA is not installed
::4. Fixed camera overlay being sent with terminal configuration after it has been removed from the display client
::5. Fixed DHCP lease time and terminal usage being updated on slave ThinManager server
::6. Fixed deadlock with terminal server groups that could cause updates to stop being sent to ThinManager

===Initial Release - 7/15/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11100
|-
| ThinServer||11050
|-
| TermCap||9.0.30
|-
| Package 9.0||11.1.0-9.0
|-
| Package 8.2||11.1.0-8.2
|-
| Package 5||5.0.5
|}

ThinManager
::1. Added free-form MultiMonitor layout to the terminal configuration wizard
::2. Added support for ThinManager VNC servers
::3. Added prepend and append keys to Barcode Configuration Module
::4. Added show feedback option for pin pad entry
::5. Added optional pin complexity requirements
::6. Added FTA license usage display
::7. Added delay until Relevance User present setting for Display Clients
::8. Improved validation of selected Display Clients
::9. Improved user interface performance for very large configurations
::10. Improved video mode selection for aTMC

ThinServer
::1. Fixed crash when service is stopped before it is fully initialized.
::2. Improved event logging performance

==ThinManager 11.0==
===Service Pack 7 - 6/23/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11008
|-
| ThinServer||11008
|-
| TermCap||9.13.1.91
|-
| Package 8.2||8.2.3
|-
| Package 8.1||8.1.13
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed CVE-2023-2914 buffer overflow
::2. Fixed CVE-2023-2915 file deletion
::3. Fixed CVE-2023-2917 file upload
::4. Fixed resource leak in terminal monitor connection

===Service Pack 6 - 3/16/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11007
|-
| ThinServer||11007
|-
| TermCap||9.13.0.89
|-
| Package 8.2||8.2.3
|-
| Package 8.1||8.1.13
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed CVE 2023-27855 ThinServer Path Traversal Upload
::2. Fixed CVE 2023-27856 ThinServer Path Traversal Download
::3. Fixed CVE 2023-27857 ThinServer Heap-Based Buffer Overflow

===Service Pack 5 - 8/5/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11006
|-
| ThinServer||11006
|-
| TermCap||9.13.0.73
|-
| Package 8.2||8.2.3
|-
| Package 8.1||8.1.13
|-
| Package 5||5.0.5
|}

ThinManager
::1. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::2. Fixed virtual machines Display Client selection
::3. Fixed not being able to set credential override for workstation Display Clients

ThinServer
::1. Added IgnoreDCOMAuthLevel registry value
::2. Updated COM/DCOM security level to use registry value from DCOMAuthLevel
::3. Improved overlay config precision
::4. Fixed CVE-2022-38742 ThinServer Heap-Based Overflow
::5. Fixed handling of unknown package file types
::6. Fixed package install

===Service Pack 4 - 6/18/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11005
|-
| ThinServer||11005
|-
| TermCap||9.0.30
|-
| Package 8.2||8.2.3
|-
| Package 8.1||8.1.13
|-
| Package 5||5.0.5
|}

ThinServer
::1. Fixed PXE server state not being updated during failover
::2. Fixed PXE server offer not including next server in proxy mode without associated range

===Service Pack 3 - 6/12/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11004
|-
| ThinServer||11004
|-
| TermCap||9.0.30
|-
| Package 8.2||8.2.3
|-
| Package 8.1||8.1.13
|-
| Package 5||5.0.5
|}

ThinManager
::1. Improved handling of AD user not being found
::2. Fixed editing resolver data
::3. Removed context menu from Display Client tree items

ThinServer
::1. Fixed deleting associated overlays when deleting a Display Client
::2. Fixed synchronization check for EFI boot loaders
::3. Fixed SmartSession message formatting to terminal for WinTMC

===Service Pack 2 - 4/15/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11003
|-
| ThinServer||11003
|-
| TermCap||9.0.29
|-
| Package 8.2||8.2.2
|-
| Package 8.1||8.1.12
|-
| Package 5||5.0.5
|}

ThinManager
::1. Improved startup speed for large configurations
::2. Improved validation when moving a display client to a new group
::3. Fixed several 4 and 5 monitor layouts

ThinServer
::1. Improved FTA license handling after restoring a configuration database
::2. Fixed copying display clients containing overlays
::3. Fixed check for whether a firmware package supports virtual screens
::4. Fixed disabling Relevance user would log off all users
::5. Fixed "allow interactive shadow" user setting not being sent to the terminal

===Service Pack 1 - 2/11/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11002
|-
| ThinServer||11002
|-
| TermCap||9.0.25
|-
| Package 8.2||8.2.0
|-
| Package 8.1||8.1.11
|-
| Package 5||5.0.5
|}

::1. New - Firmware Package 8.2 - Added native support for French, French (Swiss), German, German (Swiss), Russian, and Spanish.

ThinManager
::1. Improved Gold Master license handling
::2. Improved screen validation messaging when there are no valid screen layouts available
::3. Fixed card scan for unknown Relevance User
::4. Fixed saving screen settings for 6 and 7 monitor layouts

ThinServer
::1. Fixed IP Camera overlay issue where the overlay would be removed from the Terminal Configuration
::2. Fixed connection status for WinTMC terminals
::3. Fixed terminal-to-terminal shadowing for iTMC
::4. Fixed crash related to SmartSession when under high load on extremely large installations
::5. Fixed Display Client overrides when the Display Client is attached to a Relevance User

===Initial Release - 12/21/2018===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||11000
|-
| ThinServer||11000
|-
| TermCap||9.0.25
|-
| Package 8.1||8.1.11
|-
| Package 5||5.0.5
|}

::1. New - UEFI boot loader
::2. New - FactoryTalk Activation licensing option
::3. New - Single SE Client license per terminal
::4. New - Display Client display names
::5. New - Generic USB badge reader module
::6. New - Seven monitor configurations

ThinManager
::1. Added Display Client groups
::2. Added event log tab for Display Clients
::3. Added PXE Server with local DHCP server option
::4. Added option to disable ARP IP Address verification in DHCP server
::5. Added option to set max password age for Relevance Users
::6. Added scheduled task tab to ThinManager servers
::7. Improved touchscreen module to add touch-based navigation options
::8. Improved monitor layout validation

ThinServer
::1. Improved DHCP server to better handle large amounts of simultaneous requests
::2. Updated DHCP to work with redundant DHCP helpers, simultaneous requests from a single client
::3. Fixed load balancing when using remote desktop server groups
::4. Fixed Relevance User not being logged out on second card scan

==ThinManager 10.0==
===Service Pack 2 - 11/30/2018===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||10003
|-
| ThinServer||10004
|-
| Package 8||8.1.10
|}

ThinManager
::1. Added more user friendly messaging when attempting to delete objects that are in use
::2. Disabled copying of Active Directory linked users
::3. Disabled renaming of Active Directory linked users
::4. Fixed tree status for virtual screens

ThinServer
::1. Added option to use SAM account instead of UPN for Active Directory linked users
::1. Fixed tftp option handling in firewall compatible tftp mode.
::2. Fixed synchronization of custom variables
::3. Fixed synchronization of systems where databases have been upgraded differently
::4. Fixed timestamp handling for demo licenses and demo codes
::5. Fixed handling of some configuration overrides
::6. Fixed WiFi resolver handling to be case insensitive

===Service Pack 1 - 3/1/2018===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||10001
|-
| ThinServer||10001
|-
| Package 8||8.1.7
|}

ThinManager
::1. Fixed being unable to connected to secondary server for viewing when using mirrored licensing
::2. Fixed VNC display server name validation to prevent erroneous 'duplicate name' warning
::3. Fixed RDP display server ip address validation when using server groups
::4. Fixed overrides not being included when copying terminal
::5. Fixed access to authorization cache settings
::6. Fixed saving updated password after re-synchronization from user configuration wizard
::7. Fixed validation of RDP load balancing settings

ThinServer
::1. Fixed deletion of custom variables when parent terminal, user, or location is deleted
::2. Fixed application of user-based environment variables when using an override
::3. Fixed issue preventing a user from updating an invalid AD password from the terminal at login

===Initial Release - 12/18/2017===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||10000
|-
| ThinServer||10000
|-
| TermCap||9.0.15
|-
| Package 8||8.1.6
|-
| Package 7||7.1.7
|-
| Package 6||6.0.16
|-
| Package 5||5.0.5
|}

::1. New - Relevance User PIN pad login
::2. New - AD syncronization for trusted domains
::3. New - power on (WOL) to multiple subnets
::4. New - read/write [[custom variables]]
::5. New - six monitor configurations

ThinManager
::1. Added additional three monitor configuration
::2. Added video resolution override on a [[display client]] attached to a Relevance User
::3. Improved PXE configuration wizard IP Address range validation
::4. Improved ThinManager startup behavior when user is not allowed to connect to ThinManager
::5. Improved terminal server connection by collecting user information before attempting to connect
::6. Improved node name validation
::7. Updated overlays to not allow duplicate names
::8. Fixed OACK message length if file requested via tftp is not ready
::9. Fixed creation and move of a terminal server before finishing wizard
::10. Fixed terminal server list in priority dialog showing duplicated servers
::11. Fixed package manager dialog to ensure package is not installed if canceled
::12. Fixed ribbon bar causing crash on high DPI systems
::13. Fixed ThinManager [[synchronization]] dialog when more than two ThinManager servers
::14. Fixed display of primary/secondary installation IDs being swapped on secondary server

ThinServer
::1. Updated power on (WOL) to also send to secondary MAC address
::2. Fixed complexity requirement for short auto-generated passwords
::3. Fixed small resource leak in terminal server data collection
::4. Fixed error handling and crash for systems using firewall compatible TFTP

==ThinManager 9.0==
===Service Pack 4 - 8/15/2017===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||9008
|-
| ThinServer||9011
|-
| Package 7||7.1.7
|-
| Package 8||8.1.4
|-
| TermCap||9.0.10
|}

ThinManager

::1. Added single swap feature for [[Virtual Screens]]
::2. Fixed tree display when [[Display Clients]] are moved from one virtual screen to another
::3. Fixed wizard navigation when selecting screen directly from terminal tree

ThinServer

::1. Improved tree node name validation
::2. Improved reconnection behavior for VCenter servers
::3. Fixed copying objects leaving the item locked in the the database
::4. Fixed deleting location that left entries in the Relevance resolvers table
::5. Fixed "ignore gateway if local" setting for an RD gateway server not being honored

===Service Pack 3 - 1/18/2017===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||9007
|-
| ThinServer||9010
|-
| Package 8||8.1.2
|-
| TermCap||9.0.5
|}

ThinManager

::1. Removed password requirement for stored AD passwords.  Allows password to be stored by the end user entering it at the terminal instead of the administrator in ThinManager
::2. Fixed error when deleting the last ThinServer security group
::3. Fixed ThinManager crash for terminal configurations that contained a workstation [[display client]] before a connected [[VNC]] [[display client]]
::4. Fixed camera display server wizard not updating the camera URL after changing the camera protocol
::5. Fixed buffering from [[sending messages]] to the terminal that would result in a blank message
::6. Fixed shadow not changing when switching from one [[MultiMonitor]] terminal to another on the same screen
::7. Fixed screen specific mouse button mapping for physical screens

ThinServer

::1. Added ability to store AD password without supplying it in ThinManager
::2. Updated event log messages for [[synchronization]] events
::3. Updated diagnostic logging for [[SmartSession]] events
::4. Update to allow Promotional license to be considered redundant for disk-on-chip clients
::5. Fixed starting/stopping of the TFTP thread on a synchronized system that could prevent being able to bind to the TFTP port
::6. Fixed Active Directory [[synchronization]] issue that could cause ThinServer to not synchronize passwords
::7. Fixed screen specific mouse button mapping for physical screens
::8. Fixed copy terminal dialog where names that contain invalid characters
::9. Fixed issue with switching to camera by name from TermMon ActiveX when using camera groups
::10. Fixed issue with video modes still being filtered after copying a terminal

Firmware Package 8

::1. Added ability to have more than on mouse and keyboard on each station when using [[MultiStation]]
::2. Fixed issue with screen being cut off when using very high resolutions

===Service Pack 2 - 8/29/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||9006
|-
| ThinServer||9008
|-
| Package 8||8.0.4
|}

ThinManager

::1. Added Relevance User account authorization caching.
::2. Added terminal boot priority for terminal groups.
::3. Added [[NLA]] support in connect tab for remote desktop servers.
::4. Added dialog to show effective ThinManager [[permissions]] for current or specified user.
::5. Added option to disable device sleep for mobile clients.
::6. Added summary tab for terminal groups.
::7. Added [[Open Source Licenses]] notification dialog.
::8. Fixed crash caused by invalid camera configuration.
::9. Fixed duplication of values in fingerprint reader support dialog.
::10. Fixed terminal server tree connection status [[reporting]] for configurations not using [[display clients]].
::11. Fixed issue with reordering [[display clients]] in [[MultiMonitor]] configurations.
::12. Fixed average uptime calculation.
::13. Fixed SMTP server port not being stored properly.
::14. Fixed issue with UI freezing when leaving the terminal shadow tab.
::15. Fixed minor UI issues. 

ThinServer

::1. Added additional logging.
::2. Added last attempt to send pending emails when the service is stopped.
::3. Added DONTFRAGMENT flag to TFTP packets.
::4. Reduced the frequency with which a user could be prompted for credentials.
::5. Changed AD integration to skip accounts with no GUID.
::6. Fixed usage of SMTP port.
::7. Fixed issue with automatically generated passwords.

===Service Pack 1 - 6/9/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||9004
|-
| ThinServer||9004
|-
| Package 8||8.0.1
|}

ThinManager

::1. Added setting of terminal overrides for a [[display client]] on a virtual screen when editing from the terminals tree.
::2. Improved performance in updating tree after database changes.
::3. Fixed crash when all ThinManager servers are removed from ThinManager.
::4. Fixed issue with Active Directory account conversion.
::5. Fixed module filtering by model.
::6. Fixed workstation [[display client]] configuration wizard when using [[virtual screens]].
::7. Fixed users tree when using [[virtual screens]].
::8. Fixed [[Display Client]] wizard for ICA connections.
::9. Fixed Active Directory Manage Accounts dialog when connected to slave ThinServer.
::10. Removed setting of the refresh rate on video modes for Android clients.

ThinServer

::1. Fixed automatic [[synchronization]] when using DNS.
::2. Fixed upgrade of ThinManager server list.
::3. Fixed issue with package filtering.

Firmware Package

::1. Added support for [[sound]] over HDMI for AMD Radeon graphics.
::2. Updated Infra-T touchscreen driver to support 19" screens.
::3. Fixed crash when clicking on an empty virtual screen.
::4. Fixed moving camera [[display clients]] between [[virtual screens]] after selecting fullscreen.

Installer

::1. Fixed issue with [[firmware packages]] not be selected to install by default on certain systems.

===Initial Release - 4/25/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||9003
|-
| ThinServer||9003
|-
| TermCap||9.0.0
|-
| Package 8||8.0.0
|}

::1. New - [[Virtual Screens]]
::2. New - [[VNC]] Display Server / [[VNC]] [[Display Client]]
::3. New - Relevance User Login using Bluetooth Beacons
::4. New - Session Scaling
::5. New - SMS Messaging
::6. New - Mouse Button Mapping
::7. New - Grouping of Terminal Servers
::8. New - USB Cameras
::9. New - Firewall Compatible TFTP

ThinManager

::1. Added support for authenticated SMTP servers for event messages
::2. Added support for terminal specific ThinManager server list for synchronized systems.
::3. Improved performance when using Biometric Integration

TermCap / Firmware Package

::1. Added support for Intel Skylake processors
::2. Added support for additional Intel and Nvidia graphics adapters
::3. Added support for multiple onboard graphics [[ports]] in [[MultiMonitor]] configurations.
::4. Added support for extended function keys (F13-F24)
::5. Improved tiling performance

==ThinManager 8.1==
-----
Note: Upgrading to ThinManager 8.1 from ThinManager 8.0 will NOT require the license to be reactivated.
-----
===Service Pack 3 - 3/28/2017===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8057
|-
| ThinServer||8059
|}

ThinManager

::1. Fixed issue with Enable Relevance Location Services group setting checkbox value not being set when re-entering group configuration wizard.

ThinServer

::1. Added support for switching to camera by name with the TermMon ActiveX when using a camera group.
::2. Improved reconnecting to VMWare servers after connection loss.
::3. Fixed starting/stopping of the TFTP thread on a synchronized system that could prevent being able to bind to the TFTP port.

===Service Pack 2 - 6/9/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8056
|-
| ThinServer||8058
|}

ThinManager

::1. Fixed crash when all ThinManager servers are removed from ThinManager.
::2. Fixed issue with Active Directory account conversion.
::3. Fixed manage accounts dialog when run from slave ThinManager server.

ThinServer

::1. Fixed issue with [[custom variables]].
::2. Fixed issue with terminal commands not being cleared when monitor connection is lost.
::3. Fixed location login from slave ThinManager server.
::4. Fixed how alternate video modes are chosen for PXE clients.
::5. Fixed module filtering for terminal groups.

===Service Pack 1 - 3/29/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8054
|-
| ThinServer||8056
|}

ThinManager

::1. Fixed workstation configuration for [[display clients]] on users and/or locations.

ThinServer

::1. Fixed problem with updating Active Directory passwords on synchronized systems.
::2. Fixed issue with database [[synchronization]] check.
::3. Fixed [[Custom Variables]] for more than one variable when initially sent to the terminal.
::4. Fixed issue with resolver registration on synchronized systems.
::5. Fixed AD query to search for AD users.

===Initial Release - 1/19/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8053
|-
| ThinServer||8054
|-
| TermCap||8.1.0
|-
| Package 7||7.1.5
|}

::1. New - [[Environment Variables in ThinManager#Custom Variables|Custom Variables]] - Add user-defined variables to terminals, users, and locations that are accessible through the [[TermMon ActiveX Control]] and as environment variables for [[Display Client]] application paths.
::2. New - [[Bluetooth Module]] - Use a bluetooth adapter plugged into a terminal as a bluetooth beacon for Relevance.

ThinServer

::1. Updated Active Directory [[synchronization]] method to improve [[synchronization]] time in extremely large domains.

TermCap / Firmware Package

::1. Added support for the Digital Persona U.are.U 5160 fingerprint reader.
::2. Fixed issue where clients with an Intel graphics chipset could incorrectly draw small sections of the display.

==ThinManager 8.0==
===Service Pack 3 - 9/11/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8003
|-
| ThinServer||8003
|-
| TermCap||8.0.4
|-
| Package 7||7.1.4
|}

ThinManager

::1. Added registry entry to disable unique location login requirement.
::2. Added/Fixed sorting within terminal server users, sessions, and processes tabs.
::3. Disabled replacement authentication type when replacement is disabled.

ThinServer

::1. Added password verification / update when password is stored in ThinManager and a TermSecure user, associated with an Active Directory user, logs in.
::2. Added registry entry to modify terminal server connection timeout.
::3. Fixed [[synchronization]] of multiple [[packages]].
::4. Fixed updating terminal's secondary MAC address during replacement.
::5. Fixed deletion of terminal / user / location when initiated from the slave ThinServer.
::6. Fixed clearing event log when initiated from slave ThinServer. 

Firmware Package 7.0.4
::1. Added 3840x2160 support
::2. Fixed encryption setup in Citrix Receiver configuration.

-----
Note: Sessions running a resolution of 3840x2160 are limited to Windows Server 2012 and newer due to session size limitations of older Windows Server versions.
-----

===Service Pack 2 - 8/24/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8002
|-
| ThinServer||8002
|-
| TermCap||8.0.2
|-
| Package 7||7.1.3
|}

ThinManager

::1. Added support for CSV reports.
::2. Added logon time for users tab.
::3. Added backup capability for biometric database.
::4. Fixed Terminal Configuration Wizard flow for mobile clients.
::5. Fixed displaying extra columns on users tab.
::6. Fixed column sorting for users, sessions, and processes tabs.
::7. Fixed workstation connection state display.
::8. Fixed checking of credentials in Terminal Server Wizard for systems not using AD [[synchronization]].

ThinServer

::1. Added support for CSV reports.
::2. Fixed scheduled terminal session resets. 
::3. Fixed copy of [[Display Clients]] and Terminal Servers on synchronized systems.

Firmware Package

::1. Added support for [[Network Level Authentication]]

===Service Pack 1 - 6/26/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8001
|-
| ThinServer||8001
|-
| TermCap||8.0.1
|}

ThinManager

::1. Added login time to terminal servers sessions tab.
::2. Added reconnect option under application button menu.
::3. Added saving state of outlook bar.
::4. Changed event logging setup in ThinManager Server Wizard.
::5. Fixed historical data graph for terminal servers.
::6. Fixed issue where terminal would display restart required icon when not necessary.
::7. Fixed [[DNS Configuration]] Wizard navigation.
::8. Fixed editing of Active Directory sync objects in user tree.
::9. Fixed issue related to user reports.
::10. Fixed renaming items in tree that would cause the wrong item to be renamed.
::11. Removed Active Directory account verification when not using Active Directory integration.

ThinServer

::1. Added biometric database to scheduled backups.
::2. Changed file extension to .html for reports with automatically generated file names. 
::3. Fixed physical workstation when DNS configured.
::4. Fixed [[WinTMC]] protocol version compatibility.
::5. Fixed [[synchronization]] of resolver usage data.
::6. Fixed Active Directory integration for accounts that do not have a User Principal Name.

===Initial Release - 6/1/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||8000
|-
| ThinServer||8000
|-
| TermCap||8.0.0
|-
| Package 7||7.1.1
|}

::1. New - Active Directory Integration - Automatically rotate passwords for AD accounts use in terminal, location, user and terminal server configurations. Can also synchronize AD Organizational Units or a Security Group with ThinManager to create Relevance / TermSecure users.
::2. New - Digital Persona (Crossmatch) FingerPrint Reader Support - Allow using Fingerprint reader to log in Relevance / TermSecure user.

==ThinManager 7.0==
===Service Pack 6 - 2/13/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||7010
|-
| ThinServer||7008
|-
| TermCap||7.0.12
|-
| Package 7||7.0.10
|}

ThinManager

::1. Fixed reconstruction of VCenter Servers tree.
::2. Fixed reconstruction of Terminals tree after deletion of a [[Display Client]] or editing from a group level.
::3. Fixed editing and commands on terminals (e.g. restart) initiated from the [[Display Client]] tree and Display Server tree.
::4. Fixed handling of shadow password to prevent terminal from enter a state in which it could no longer be shadowed.
::5. Fixed enable / disable of tiling selection to allow selection when using Relevance.
::6. Fixed deletion of [[Demo Codes]] on synchronized system.
::7. Fixed camera overlay config tab information display
::8. Fixed renaming of [[Display Client]] from Location tree.

ThinServer

::1. Fixed terminal configuration issue for physical workstations.
::2. Fixed improper behavior when cancelling terminal replacement at the password prompt.
::3. Fixed handling of shadow password to prevent terminal from enter a state in which it could no longer be shadowed.
::4. Fixed handling of [[SmartSession]] server list when DNS enabled.

===Service Pack 5 - 12/12/2014===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||7007
|-
| ThinServer||7005
|-
| TermCap||7.0.10
|-
| Package 7||7.0.9
|}

ThinManager

::1. Fixed linked application browse button issue when the file path also contained arguments.

ThinServer

::1. Fixed issue where [[shadowing]] from the slave ThinManager server could cause the client to no longer be able to be shadowed from ThinManager.
::2. Fixed auto-[[synchronization]] sometimes failing when using server names with DNS.

[[Packages]]

::1. Improved performance with cycling [[IP cameras]].

TermCap 

::1. Added Logic Supply ML210G-10. 
::2. Added additional available session resolutions for [[iTMC]] and [[WinTMC]].

===Service Pack 4 - 11/4/2014===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||7006
|-
| ThinServer||7004
|-
| TermCap||7.0.8
|-
| Package 7||7.0.8
|}

ThinManager

::1. Fixed configuration tab not updating for [[Display Clients]].
::2. Fixed delete [[demo codes]].
::3. Fixed manual [[synchronization]] to prevent message boxes for [[module installation]].
::4. Fixed navigation in Terminal Configuration Wizard when using Workstation [[Display Clients]].
::5. Fixed clear event log from ThinManager server tree.
::6. Fixed terminal editing and commands from [[Display Servers]] tree.
::7. Fixed renaming of [[Display Client]] from Location tree.
::8. Fixed application button.
::9. Improved handling of terminal shadow start-up to prevent failed connection attempt.
::10. Improved speed of tree searches.

ThinServer

::1. Fixed issue detecting incorrect ThinManager server attempting to auto-synchronize.
::2. Fixed generating configuration for Workstation [[Display Clients]] when using DNS.
::3. Fixed generating URL for camera configuration.
::4. Fixed terminal replacement not showing groups when using replace with like terminals only setting.
::5. Fixed CPU utilization issue when IP Address range is full when using PXE.
::6. Improved [[SmartSession]] algorithm for large number of terminals.
::7. Improved TFTP transfer speed when using PXE.

===Service Pack 3 - 6/13/2014===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||7005
|-
| ThinServer||7003
|-
| TermCap||7.0.5
|-
| Package 7||7.0.5
|}

ThinManager

::1. Fix terminal servers “status” tab event registration. Tab was not updating automatically.
::2. Fix [[Display Client]] “config” tab event registration.
::3. Fix navigation in camera [[Display Client]] wizard.
::4. Fix the enabled/disabled status of the Modify button in the ribbon bar when “ThinManager Servers” node is selected.
::5. Modified initialization of the application button. Now starts out red.
::6. Fixed problem with 64-bit ThinManager that was causing connection status to be displayed incorrectly.
::7. Make sure all report selections are initialized.
::8. Fix camera connection tab. Make sure IE active x control was terminated when leaving the tab.
::9. Fixed terminal tree and terminal servers tree when “Show Connected Only” selected.
::10. Added support for RTSP [[IP cameras]] in the camera wizard.

ThinServer

::1. Fix location based [[display clients]] with camera overlays. 
::2. Allow entry in the reservation table to count as a “known client” is PXE server
::3. Added support of RTSP [[IP cameras]].
 
[[Packages]]

::1. Added support for RTSP [[IP cameras]]

TermCap 

::1. Added Advantech UNO-2362G
::2. Added support for Intel Valleyview video chips
::3. Added support for AMD Radeon E6460

===Service Pack 2 - 4/18/2014===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||7003
|-
| ThinServer||7002
|}

ThinManager

::1. Fix information displayed in details pane for terminal groups
::2. Fix navigation in [[Display Client]] Wizard, when no Relevance license is present.
::3. Fix bitmaps in ribbon bar so that they have correct transparency under Aero.
::4. Enhance performance of [[shadowing]] a terminal or screen
::5. Fix behavior when all ThinManager servers removed 
::6. Fix behavior of details panes that were docked differently from the default.

ThinServer

::1. Fix use of demo code on a synchronized pair of ThinManager servers.
::2. Fix how [[permissions]] applied to [[display clients]] when determining if [[display client]] is accessible.

[[Packages]]

::1. Added Locate Pointer module (Package 7)

TermCap 

::1. Added Arista AP3500
::2. Added Intel NUC DC5342HYE

===Service Pack 1 - 4/1/2014===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||7001
|-
| ThinServer||7001
|-
| Package 7||7.0.3
|-
| Package 6||6.0.15
|}

ThinManager

::1. Fix problem with username/password/domain overrides for User and/or Location based [[Display Clients]]
::2. Fix window title of torn-off tabs. Was not updating.
::3. Fix problem with [[shadowing]] of Screens. Was not always establishing shadow connection correctly.
::4. Fix window title of screen shadow tab to correctly reflect the screen name.
::5. Fix resolver drop-down selection when resolver is used multiple times
::6. Fix extended desktop availability to be based on number of monitor in the screen.
::7. Fix update of the Terminal Server Config tab and the Terminal Server Property tab.
::8. Fix navigation in Terminal Configuration wizard for iPads when using synchronized ThinServers.
::9. Fix display of [[display clients]] in the location node. Tree was sorting, so user selected order was not reflected in the tree.

ThinServer

::1. Fix problem with Backup Firmware Package that was sometimes causing ThinServer to exit
::2. Fix auto-create Terminal to copy the [[permissions]] of the Default terminal

[[Packages]]

::1. Update to Share Keyboard/Mouse Master module, to support non-rectangle monitor layouts when using [[multimonitor]] thinclients (Package 6 and 7)
::2. TermSecure / Relevance Users – fix to visible [[display clients]] after a user logs off. ([[Packages]] 6 and 7)
::3. USB Touchscreen module – support for HID compatible devices (Package 7)
::4. Intel Video driver module – support for more video output types

TermCap 

::1. Added Advantech UNO-3073G, TPC-1550-B, TPC-1750-B, TPC-2140

===Initial Release - 3/10/2014===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||7000
|-
| ThinServer||7000
|-
| Package 7||7.0.2
|-
| Package 6||6.0.14
|-
| Package 5||5.0.5
|}

::1. New - Relevance - Location based thin clients.  Relevance provides mobile environments the ability to deliver the right content to the right person at the right time and place.
::2. New - 2012 Session Size Limits - Support of sessions up to 8192x8192.  This greatly increases the layout possibilities for high resolution monitors.
::3. New - Microsoft Ribbon Theme - Updated look and the ability to tear-off tabs and organize them to the users preference.
::4. New - Mouse Locator Module - The Mouse Locator Module places a large cross-hair at the mouse location to make it easier to locate on large format displays.

==ThinManager 6.0==
===Service Pack 4 - 4/24/2013===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||6006
|-
| ThinServer||6010
|}

ThinManager

::1. Fix navigation for TermSecure user when adding a workstation [[display client]]
::2. Change dialog title in terminal configuration wizard when not using [[display clients]].
::3. Fix status icon of [[modules]] in the terminal configuration wizard

ThinServer

::1. Fix package 5 install
::2. Upgrade standard [[packages]] (not custom [[packages]]) during service pack install
::3. Make sure module name is displayed even if module does not exist in the selected package
::4. Fix to TFTP implementation. Don’t send first packet before ACK received from terminal.

Package 6 (package version 6.0.11)

::1. Firmware 6.0.16
::2. Fix for Intel E100 network adapters
::3. Better implementation of calibration activated by long touch 
::4. Fixes to [[terminal to terminal shadowing]] of [[WinTMC]] and [[iTMC]] clients

TermCap 6.0.15

::1. Added Arecont cameras
::2. Added Radeon support
::3. Added additional Savage 4 support
::4. Allow selection of COM [[ports]] 1-8 for touchscreens on a Generic PXE client
::5. Added AP3400

===Service Pack 3 - 2/26/2013===

{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||6005
|-
| ThinServer||6009
|}

New Feature

::1. [[MultiStation]]: [[MultiStation]] offers the ability to have up to 5 independent users work on one client at the same time. Lower costs and increase your network efficiency by using [[MultiStation]], the newest offering for the ThinManager Platform.

ThinManager
::1. Enhanced Package Management (copy, rename, delete).
::2. Enhanced module/firmware install by allowing package selection.
::3. Package Backup/Restore.
::4. Allow a package to be locked.
::5. Enhanced tree view for [[MultiMonitor]] and [[MultiStation]] thin clients.
::6. Ability to shadow an individual screen/station from ThinManager.
::7. Ability to shadow an individual screen/station from a Terminal-to-Terminal shadow [[display client]].
::8. Better redrawing of UI during terminal shadow.
::9. Setting to allow terminal replacement only with same model.

ThinServer
::1. New permission setting for package creation/modification.

Package 6
::1. Firmware was modified to support multi-station

TermCap
::1. 1600×900 Video Mode for Unichrome.

===Service Pack 2 - 11/5/2012===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||6003
|-
| ThinServer||6006
|}

ThinManager
::1. Clear second mac from database when clearing terminal id
::2. Fix detection of feature support by model

ThinServer
::1. Fix to tftp thread startup/shutdown
::2. Take into account second MAC when identifying hardware in DHCP server
::3. Fixed registry entry default values
::4. Added package validation to database integrity check
::5. Fixed module parameters returned by stored procedure.
::6. Fix to cleanup of entries in database when monitor connection lost
::7. During replacement use PCI ids to determine if it is appropriate to set model back to Generic/PXE

Package 6.0.7
::1. RDP SSL certificate fixes.
::2. Fix date/time when using time zone redirection.
::3. Windows Server 2008 drive redirection enhancements.
::4. Fix mouse pointer when [[shadowing]] a multi-monitor thin client.
::5. Retain DNS settings provided by ThinManager, instead of DNS settings from the DHCP server.
::6. Support for EELY touch controller (USB).
::7. Performance enhancements for [[sound]] redirection.
::8. Quicker shadow initiation.
::9. PC Prox Sonar module.
::10. Fix to ICA module.
::11. Support for IR Touch Series K touch controller.
::12. Added support for COM5 and COM6 on Arista BoxPCx40
In order to access COM5 add the Add Serial Port Module to the terminal configuration and configure the module settings as follows:<br>
::SerialPort 5
::Port 0x3e0
::IRQ to 11
In order to access Com6 add the Add Serial Port Module to the terminal configuration and configure the module settings as follows:<br>
::SerialPort 6
::Port 0x2e0
::IRQ to 0

TermCap
::1. Added support for Intel Clarkdale
::2. Added support for Intel 
::3. Added support for Intel Arrandale

===Service Pack 1 - 8/1/2012===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||6002
|-
| ThinServer||6004
|}

ThinManager

::1. Delete workstation nodes before restoring configuration

ThinServer

::1. Fix [[module installation]] on synced ThinServers 
::2. PXE server was not correctly stopped/started after restoring configuration 
::3. Fixed sync of [[packages]] that did not exist on both ThinServers 
::4. Restart tftp thread after restoring configuration when necessary. 
::5. Fix disable of terminal server when using DNS. 
::6. Changed queuing to better accommodate DeltaV users licensing requirements 
::7. Fixed installation of firmware from synchronized slave.

Firmware 

::1. Support for Hyper–V virtual thin clients 
::2. Support for Intel e1000 network adapter 
::3. Fixed Citrix published applications that have a space in the name 
::4. Eliminated multiple monitors connections to ThinServer

TermCap 

::1. Add 1600x900 Video Mode for Unichrome 
::2. Added supported for Hyper-V virtual client 
::3. Added Intel 965G video adapter 
::4. Added Intel Q35 video adapter 
::5. Added Intel 855GM video adapter 
::6. Added Intel 915G video adapter 
::7. Added Intel 965Q video adapter

[[Modules]] 
::1. ICA Client 12 – fixed config file generation 
::2. Use alternate address – fixed config file generation 
::3. Keyboard configuration – fixed support for international keyboards 
::4. Soundblaster [[sound]] – new 
::5. Shared keyboard mouse master – fixed under package 6 when using [[multimonitor]] 
::6. USB [[sound]] – added soundblaster support

===Initial Release - 5/14/2012===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| ThinManager||6001
|-
| ThinServer||6001
|}

New Features
::1. Firmware [[Packages]] 
::2. Chain Loader for ThinManager Ready thin clients 
::3. Terminal Description Field 
::4. USB to VGA [[MultiMonitor]] Support 
::5. [[iTMC]] for the Apple iPad  
::6. Block Mouse Button Functions

==ThinManager 5.0==
===Service Pack 2 - 1/11/2012===

ThinManager

::1. Clear the video pci id for PXE clients when clearing the terminal id 
::2. Fix display of camera overlay properties in configuration tab 
::3. Fix reservations for dual-ethernet thin clients

ThinServer

::1. Fixed support for relay agents in the PXE server 
::2. Fixed handling of multiple ip ranges in PXE server 
::3. Fixed handling of abandoned events. Was locking up sync threads. 
::4. Fixed [[synchronization]] check for tables w/o primary keys (TerminalData) 
::5. Fixed problem with database callbacks when ThinManager has not been run 
::6. Changed the way session information is gathered for better compatibility with Windows 2008

Firmware 

::1. Fix for drop-down menu

TermCap 

::1. Add 1600x900 mode for AP-3200 and Generic PXE LX800 based on Dell P2011H monitor 
::2. Add Via VX900 support for PXE booting units 
::3. Added Intel N10 and Via CN896 for PXE booting units 
::4. Add Generic PXE support for Intel 965GME (8086:2a12) 
::5. Add 1600x900 mode for AP-3200 and Generic PXE LX800 based on Dell P2011H monitor

[[Modules]]

::1. Touchcontrol – fix touch scaling for use w/ corevideo2 [[modules]] 
::2. Usbtouch – fix for IR Touch TouchScreens 
::3. Video2_chrome9 – added to support VIA VX 900 hw 
::4. Video2_intel3 – Fix to properly determine the model of the thin client

===Service Pack 1 - 8/29/2011===

ThinManager

::1. Fix problem with setting and storing custom URL for [[IP Cameras]]. 
::2. Fix terminal model information display in the terminal configuration wizard 
::3. Fix initial creation of VMWare server, that left an erroneous entry in the lock table. Prevented restoring of configuration, with an error about an object being locked. 
::4. Allowed periods (.) in the VM Ware server name (mostly for domains)

ThinServer

::1. Fixed problem with terminal server monitor threads that was locking up [[synchronization]] 
::2. Fix flag that enables broadcast of “in demo mode” messages to terminals 
::3. Disable check for ip configuration conflicts during terminal boot, when the PXE Server is disabled. 
::4. Fixed problem that caused the DHCP Interfaces to be blank after restoring a configuration. 
::5. Added XLi to the promotional license.

===Initial Release - 7/8/2011===

New Features
::1. PXE thin client support 
::2. XLi licensing 

==ThinManager 4.1==
===Service Pack 1 - 7/13/2011===

ThinManager

::1. Better validation of workstation tree information to prevent ThinManager crash. 
::2. Stop requiring ip address for vcenter when using dns.

ThinServer

::1. Fix termsecure “UseTerminal” settings 
::2. Fix tracking of time in sync thread that would cause [[synchronization]] to momentarily fail. 
::3. Fix buffer overrun in non-multicast tftp server that would cause ThinServer to crash 
::4. Fixed 4.0 upgrade routines 
::5. Fixed problem with mirrored license [[permissions]]

===Initial Release - 4/19/2011===

New Features
::1. 64-bit version of ThinManager and ThinServer 
::2. Support for control and management of VMWare VCenter servers

==ThinManager 4.0==
===Service Pack 4 - 2/28/2011===

ThinManager 
::1. Fixed prompt in [[synchronization]] setup 
::2. Fixed problem with creating tree in “show connected only” mode. 
::3. Fixed validation problem that would not allow the ip address to be entered for a ThinManager server when DNS is enabled. 	

ThinServer

::1. Fixed some log messages. 
::2. Changed time stamping to alleviate problems with changing the server time. 
::3. Fixed removal of [[synchronization]] threads that are no longer needed. 
::4. Fixed problem with “Main Monitor” setting when set to “At Mouse” 
::5. Improved database integrity when switch between multi-monitor and single-monitor modes.

Firmware 

::1. Improved image decoding for [[IP cameras]] to allow support of more types of [[ip cameras]]

Termcap 
::1. Added support for Advantech 1150G 
::2. Added support for Advantech 2053GL 
::3. Added support for Advantech ARK-Advantech ARK-3202 
::4. Added support for Nematron nPC100 
::5. Added support for Nematron ePC1900 
::6. Added support for Nematron ePC1700 
::7. Added support for Nematron ePC1500 
::8. Added support for Nematron ePC1200
::9. Added support for BoxPC238D

[[Modules]] 
::1. [[Sound]] module for Advantech 1150G
::2. [[Sound]] module for Advantech 2053GL
::3. [[Sound]] module for Advantech 3202
::4. [[Sound]] module for Arista BoxPC238D
::5. [[Sound]] module for Nematron Models
::6. Video2_intel4 Module – added to support Nematron hardware 
::7. Universal [[sound]] module architecture.

===Service Pack 3 - 7/23/2010===

ThinManager 

::1. Update release date only

ThinServer

::1. Fixed problem with loading master license, that caused ThinServer to terminate on some systems.

Firmware 

::1. 2008 Server RDP device license fix 
::2. Camera overlay start up fixes 
::3. Fix to identification of the second ethernet port on UNO-2173 

Termcap 

::1. Added support for AP-3300

[[Modules]] 
::1. Added AP-3300 [[sound]] module 
::2. Added pcProxUSB module to support keyboard wedge version of the pcProx USB HID scanner 
::3. Change to ICA client version 8 module. Removed specific of the UDP for browser protocol 
::4. Added support for new Elographics controller to the USBTouch module

===Service Pack 2 - 5/5/2010===

ThinManager

::1.	Fix [[Display Client]] icon on [[multimonitor]] configuration. Did not reflect presence of overrides.
::2.	Fix [[WinTMC]] options “Always maintain monitor connection” and “Show groups as separate windows”. Check box did not reflect group inheritance setting.
::3.	Fix [[Display client]] icon after re-ordering of [[Display Clients]]. Icon would disappear after re-ordering.
::4.	Fixed initial icons for Terminal Servers when ThinManager started. Icon did not reflect the lock or enable/disable state of the Terminal Server.
::5.	Added ability to re-arrange monitors in multi-monitor configurations.

ThinServer

::1.	Change way user SIDs are gathered and cached. 
::2.	Fixed application of camera options. Camera options are only applied if selected. 
::3.	Fix enable/disable of Terminal server on synchronized systems. 
::4.	Fix to CRC generation routines. Some [[demo codes]] would not be recognized as valid. 
::5.	Fix [[Synchronization]] problem with respect to encryption that causes [[synchronization]] to fail and re-sync. 
::6.	Fixed [[SmartSession]] data collection. Prevented collection of load balancing data under some circumstances.

Firmware 

::1. Support for Dual Monitor with one graphics adapter 
::2. Stop listening on Port 6000 
::3. 32bpp support for UNO-2173 and ARK-1382 
::4. Allow initial program of longer than 128 characters

[[Modules]]

::1. Redundant Ethernet Module – Warning messages if backup adapter is disconnected

TermCap 

::1. Fix default resolution for the Axis M1011 camera. 
::2. Added Advantech UNO-2173 
::3. Added Advantech ARK-1382 

===Service Pack 1 - 2/18/2010===

ThinManager

::1.	Fix problem with Camera Option settings. Camera options could not be set in some cases. 
::2.	Fix “Copy settings from another terminal” option in the Terminal Configuration Wizard. Only copy the model from the source configuration when the target configuration is not associated with a piece of hardware.
::3.	Fix support for some 4 monitor layouts. 
::4.	Allow setting of the application group hotkey at appropriate times.
::5.	Made the “Browse” button available at appropriate times in the Report generation dialog

ThinServer

::1. Fix support for non-redundant licensing on synchronized systems. 
::2. Fix for duplicate license detection on synchronized systems. 
::3. Removed enforcement of the terminal to terminal shadow license.

TermCap 

::1. Added 1600x900 video mode for [[WinTMC]]

==ThinManager 3.3==
===Service Pack 2 - 1/13/2010===

ThinManager / ThinServer

::1.	Fix problem with manual [[synchronization]]. 
::2.	Fix problem with main menu hotkey and application group hotkey enable / disable
::3.	Make sure “Browse” button in Report Scheduling is only available at appropriate times. 
::4.	Allow specification of non-existing files as the report target
::5.	Added display of [[multimonitor]] configuration in the details pane of the terminal.

===Service Pack 1 - 7/7/2009===
ThinManager / ThinServer

::1. Removed install ids for motherboards whose manufacturer did not provide unique serial numbers.
::2. Fix problem with initial program / command line options
::3. Performance improvement to resetting terminal server sessions when TermSecure user logs off
::4. Fix permission problem that prevented some commands from being sent to the terminal
::5. Fixed problem with updating some Application Group icons
::6. Added display of [[multimonitor]] configuration in the details pane of the terminal.

Firmware

::7. Savage video module now ignores EDID
::8. Fixed touchscreen [[modules]] for use with [[multimonitor]].
::9. Fixed keyboard mapping for the backslash (‘\’) key on non-standard keyboards
::10. Fixed memory leak in sliding windows

=Terminal Capabilities Database=
==TermCap2 14.0.x / TermCap 9.14.0.x==
===TermCap2 14.0.118 / TermCap 9.14.0.118 - 8/30/2024===
::1. Added Allen-Bradley 6300x-SW2
::2. Added Advantech TPC-B300
::3. Added package 9.4 and serial ports to OnLogic TM260
::4. Fixed model number and package support for Dell 7230

===TermCap2 14.0.116 / TermCap 9.14.0.116 - 5/22/2024===
::1. Added TMC for Windows
::2. Added TMC for iOS
::3. Added Allen-Bradley 6300T-JB1
::4. Added Allen-Bradley 6300B-BMN
::5. Added Allen-Bradley 6300x-EW1
::6. Added Dell Latitude 7230
::7. Added 10zig 7000q as compatible
::8. Added Dell Optiplex 5000 D15U as compatible
::9. Added Hewlett-Packard t655 as compatible
::10. Added 8086:4571 and 8086:4680 video chipsets
::11. Added package 4 to support certain legacy disk on chip thin clients
::12. Updated aTMC display name to TMC for Android
::13. Updated iOS Device (iTMC) and WinTMC display name to include legacy tag

==TermCap2 13.2.x / TermCap 9.13.2.x==
===TermCap2 13.2.110 / TermCap 9.13.2.110 - 1/9/2024===
::1. Added Nematron nPC20-J6412
::2. Added Lenovo M75q Gen 2 as compatible
::3. Updated explicitly supported list of AMD graphics chipsets with 0x1636

===TermCap2 13.2.107 / TermCap 9.13.2.107 - 11/17/2023===
::1. Added AIS PBC-1000-ACLB
::2. Updated Advantech UNO-238 V2 maximum number of monitors to four

===TermCap2 13.2.105 / TermCap 9.13.2.105 - 10/31/2023===
::1. Added Advantech UNO-238 V2
::2. Added OnLogic TM260
::3. Added Lenovo M70q gen 2 as compatible
::4. Added OnLogic ML350G-10 as compatible
::5. Updated OnLogic TM120 to include COM1

===TermCap2 13.2.100 / TermCap 9.13.2.100 - 9/20/2023===
::1. Added Firmware Package 9.4
::2. Added Allen-Bradley 6300B-JB1
::3. Added Nexcom B337 and B360 as compatible
::4. Added Cimon CM-NB5011-D and CM-NB200-D as compatible
::5. Added Intel NUC12WSHv5 as compatible
::6. Added Dell 7090 Micro D14U as compatible
::7. Updated explicitly supported list of Intel graphics chipsets with 0x4626 and 0x4628
::8. Fixed Firmware Package 7.1 not available for several Arista models
::9. Fixed Firmware Package 9.2 and newer available for several models with Intel N270 processor

==TermCap2 13.1.x / TermCap 9.13.1.x==
===TermCap2 13.1.92 / TermCap 9.13.1.92 - 7/18/2023===
::1. Added Allen-Bradley 6181X

===TermCap2 13.1.91 / TermCap 9.13.1.91 - 5/24/2023===
::1. Fixed Allen-Bradley 6200T-BA maximum resolution to 2560x1600
::2. Fixed mode line for 3840x2160 video modes for various AMD chipsets

===TermCap2 13.1.89 / TermCap 9.13.1.89 - 2/2/2023===
::1. Added Allen-Bradley unknown models
::2. Added Asem unknown models
::3. Updated Hyper-V gen 2 VMs to only allow 16M colors
::4. Updated Allen-Bradley 6300T-BB to allow package 9.3
::5. Updated Systec&Systems ENDPOINT to release hardware specs
::6. Updated Vartech VTPC to allow touchscreen configuration for any serial port

==TermCap2 13.0.x / TermCap 9.13.0.x==
===TermCap2 13.0.80 / TermCap 9.13.0.80 - 12/9/2022===
::1. Added Advantech UNO-2271G-V2
::2. Added AIS BCNACS-0000-ACLB
::3. Added Intel WhiskeyLake-U and JasperLake chipset information
::4. Added Lenovo M90n as compatible

===TermCap2 13.0.75 / TermCap 9.13.0.75 - 9/16/2022===
::1. Added Systec & Solutions ENDPOINT

===TermCap2 13.0.74 / TermCap 9.13.0.74 - 8/12/2022===
::1. Fixed ARP-55xx and ARP-22xx video modes
::2. Updated OnLogic TM120 maximum number of monitors to four
::3. Added ThinManager compatible models (TermCap2), non-functional changes

===TermCap2 13.0.70 / TermCap 9.13.0.70 - 7/29/2022===
::1. Added ThinManager compatible models (TermCap2), non-functional changes

===TermCap2 13.0.68 / TermCap 9.13.0.68 - 7/19/2022===
::1. Added ThinManager compatible models (TermCap2), non-functional changes

===TermCap2 13.0.67 / TermCap 9.13.0.67 - 6/29/2022===
::1. Added Pepperl+Fuchs BPC3200
::2. Added OnLogic TM120 and TM710 

===TermCap2 13.0.63 / TermCap 9.13.0.63 - 5/23/2022===
::1. Added ThinManager compatible models (TermCap2), non-functional changes

==TermCap2 12.1.x / TermCap 9.12.1.x==
===TermCap2 12.1.60 / TermCap 9.12.1.60 - 4/4/2022===
::1. Added additional Apple device native resolutions

===TermCap2 12.1.57 / TermCap 9.12.1.57 - 2/16/2022===
::1. Added Advantech TPC-B200

===TermCap2 12.1.52 / TermCap 9.12.1.52 - 10/29/2021===
::1. Added firmware package 9.3

===TermCap2 12.1.51 / TermCap 9.12.1.51 - 10/15/2021===
::1. Fixed firmware package 7.1 not being available to select
::2. Fixed terminal hotkeys not being configurable for WinTMC terminals

===TermCap2 12.1.45 / TermCap 9.12.1.45 - 8/4/2021===
::1. Fixed certain legacy clients being restricted to firmware package 5

===TermCap2 12.1.43 / TermCap 9.12.1.43 - 6/18/2021===
::1. Added Dynics BTMA series
::2. Added support for gen 2 Hyper-V virtual machines
::3. Added Intel HD Graphics 505 chipset information

==TermCap2 12.0.x / TermCap 9.12.0.x==
===TermCap2 12.0.37 / TermCap 9.12.0.37 - 4/6/2021===
::1. Added Advantech UNO-2372G
::2. Added support for Silicon Motion graphics chipsets
::3. Added Intel HD Graphics 630 and UHD Graphics 630 chipset information

===TermCap2 12.0.33 / TermCap 9.12.0.33 - 2/15/2021===
::1. Added Contec BX-C210 and BX-S2000T
::2. Fixed 3840x1080 not being available for certain models

===TermCap2 12.0.31 / TermCap 9.12.0.31 - 12/11/2020===
::1. Fixed firmware package selection being too restrictive for certain graphics chipsets

===TermCap2 12.0.29 / TermCap 9.12.0.29 - 12/11/2020===
::1. Added new TermCap database format (TermCap2) for use in ThinManager 12.0 and newer, improves performance
::2. Added aditional video modes for integrated panels that support external displays
::3. Added support for certain AMD Vega graphics chipsets
::4. Added support for firmware package 9.2

==TermCap 9.0.x==
===TermCap 9.0.39 - 10/6/2020===
::1. Added Advantech UTC-320F

===TermCap 9.0.38 - 9/1/2020===
::1. Added Contec BX-S959
::2. Added ultrawide video modes for 2560x1080, 3440x1440, and 3840x1080

===TermCap 9.0.37 - 7/27/2020===
::1. Added Allen-Bradley 6300T-BA
::2. Added OnLogic TM410
::3. Updated Logic Supply manufacturer name to OnLogic

===TermCap 9.0.34 - 1/31/2020===
::1. Updated Advantech TPC-1881WP to allow two displays
::2. Updated 8086:22b0-22b3 graphics chipset to allow package 9

===TermCap 9.0.33 - 9/25/2019===
::1. Added Advantech TPC-1251T, TPC-1551T, and TPC-1751T
::2. Added AIS BVND0U-0000-A00C
::3. Added Pepperl+Fuchs BTC12
::4. Added serial port settings to Logic Supply TM110
::5. Fixed serial touch screen settings for Advantech UNO-2362G and Arista 7824A-B01, 7824B-B01, and B01 Series
::6. Fixed 256-bit color depth settings for AMD Geode graphics
::7. Removed package 9 compatibility from AMD Geode based clients

===TermCap 9.0.30 - 5/6/2019===
::1. Added serial port settings to Logic Supply TM250

===TermCap 9.0.29 - 4/15/2019===
::1. Added Advantech TPC-1881WP
::2. Added 1400x1050 video modes

=Firmware=
==Firmware Package 14.0.x==
===Firmware Package 14.0.1 - 9/24/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.4||14.0.1-9.4
|-
| Package 9.3||14.0.1-9.3
|-
| Package 9.2||14.0.1-9.2
|-
| Package 9.1||14.0.1-9.1
|-
| Package 9.0||14.0.1-9.0
|-
| Package 8.2||14.0.1-8.2
|}

::1. Added support for Allen-Bradley 6300x-SW2
::2. Added support for LACP
::3. Added OSK configuration option to show key labels for current shift state
::4. Added iTMC and wTMC to RDP Port, ActiveX, Barcode Config, and Logging modules
::5. Updated Nymi libraries
::6. Fixed undesirable touchscreen behavior for tablets with default touchscreen support
::7. Fixed SmartSession queue times not being honored
::8. Fixed time zone shown in Windows not being correct

===Firmware Package 14.0.0 - 5/22/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.4||14.0.0-9.4
|-
| Package 9.3||14.0.0-9.3
|-
| Package 9.2||14.0.0-9.2
|-
| Package 9.1||14.0.0-9.1
|-
| Package 9.0||14.0.0-9.0
|-
| Package 8.2||14.0.0-8.2
|}

::1. Added support for 6300x-EW1 and 6300B-BMN
::2. Added WiFi status to monitor connection for wireless terminals
::3. Added battery status to monitor connection for wireless terminals
::4. Added support for screen brightness buttons for wireless terminals
::5. Added support for Elkhart Lake and Alder Lake audio chipsets
::6. Added support for Intel 8265 wireless chipset
::7. Updated Nymi module
::8. Fixed camera overlay names being displayed when overlay option is set to disabled
::9. Fixed certain Hope Industrial Systems USB touchscreens not being recognized

==Firmware Package 13.2.x==
===Firmware Package 13.2.2 - 2/27/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.4||13.2.2-9.4
|-
| Package 9.3||13.2.2-9.3
|-
| Package 9.2||13.2.2-9.2
|-
| Package 9.1||13.2.2-9.1
|-
| Package 9.0||13.2.2-9.0
|-
| Package 8.2||13.2.2-8.2
|}

::1. Added support for Broadcom NetXtreme II network chipset
::2. Added support for Intel ax211 network chipset
::3. Added support for Intel stmmac network chipsets
::4. Improved touchscreen calibration experience for USB touchscreens that report absolute coordinates to not require manual calibration
::5. Improved touchscreen controller identification for monitors that report multiple devices
::6. Updated Nymi module to include endpoint id property
::7. Updated Realtek rtl8812au driver
::8. Updated Intel VA-API driver
::9. Fixed AMD Radeon module install on platform 9.4
::10. Fixed incorrect touchscreen calibration when used with rotated monitors in multimonitor configurations
::11. Fixed Identify Monitors at Startup setting not displaying properly
::12. Fixed bring unable to badge in user via login from main menu

===Firmware Package 13.2.1 - 10/31/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.4||13.2.1-9.4
|-
| Package 9.3||13.2.1-9.3
|-
| Package 9.2||13.2.1-9.2
|-
| Package 9.1||13.2.1-9.1
|-
| Package 9.0||13.2.1-9.0
|-
| Package 8.2||13.2.1-8.2
|}

::1. Initial release of package 9.4
::2. Added touchscreen calibration no-touch timeout option to USB Touch Screen Driver module
::3. Added support for rtl8812au wireless network chipset
::4. Improved access NFC smartcard readers connected locally for Nymi application
::5. Fixed docker container hosting not loading container images (package 9.3)
::6. Fixed long-touch on touchscreen still being active when the virtual keyboard is active
::7. Fixed certain settings (selector drop-down) remaining after ThinManager user logged off
::8. Fixed ThinManager User Services prompt asking for Windows Password after attempting to badge in
::9. Fixed efivarfs error message when setting a model number from unknown model module

===Firmware Package 13.2.0 - 9/20/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.2.0-9.3
|-
| Package 9.2||13.2.0-9.2
|-
| Package 9.1||13.2.0-9.1
|-
| Package 9.0||13.2.0-9.0
|-
| Package 8.2||13.2.0-8.2
|}

::1. Added support for Device Authentication
::2. Updated Generic USB Redirection module for WinTMC

==Firmware Package 13.1.x==
===Firmware Package 13.1.2 - 8/29/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.1.2-9.3
|-
| Package 9.2||13.1.2-9.2
|-
| Package 9.1||13.1.2-9.1
|-
| Package 9.0||13.1.2-9.0
|-
| Package 8.2||13.1.2-8.2
|}

::1. Added support for SecuGen SGU-HU30 fingerprint reader
::2. Added option in the Advanced Video Configuration Module to address an issue with monitor rotation in certain multi-monitor configurations
::3. Added 6300B-JB1 as supported model in unknown model module
::4. Improved hot-plug support with generic USB redirection with FreeRDP
::5. Improved HTTPS file download process
::6. Improved Nymi band support
::7. Updated 'Relevance Logon' text to 'ThinManager User Login'
::8. Fixed F8 key not being passed through VNC connections
::9. Fixed shadowing of a single screen of a multi-monitor WinTMC terminal
::10. Fixed not being able to select fullscreen in selector on a tiled Display Client
::11. Fixed model being assigned for unsupported hardware in unknown model module
::12. Fixed inconsistent behavior with virtual screen Display Clients with more than eight Display Clients
::13. Fixed the monitor connection needing to be reestablished after initially connecting after configuration
::14. Fixed intermittent failing to download configuration in certain circumstances

===Firmware Package 13.1.1 - 5/11/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.1.1-9.3
|-
| Package 9.2||13.1.1-9.2
|-
| Package 9.1||13.1.1-9.1
|-
| Package 9.0||13.1.1-9.0
|-
| Package 8.2||13.1.1-8.2
|}

::1. Added key block module support for the on-screen keyboard
::2. Added file signature to modules
::3. Added retry behavior to module download
::4. Added retry behavior to container image preload
::5. Updated progress messages during container image preload
::6. Updated module compression to improve installation time
::7. Updated container image preload behavior to abort on failure instead of rebooting
::8. Fixed MultiMonitor not displaying correctly when spanning multiple graphics adapters
::9. Fixed architecture type in DHCP request for PXEClient (package bootloader)

===Firmware Package 13.1.0 - 2/2/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.1.0-9.3
|-
| Package 9.2||13.1.0-9.2
|-
| Package 9.1||13.1.0-9.1
|-
| Package 9.0||13.1.0-9.0
|-
| Package 8.2||13.1.0-8.2
|}

::1. Added support for e-signature
::2. Added package bootloader to support HTTPS boot (9.2, 9.3)
::3. Fixed serial port redirection when using FreeRDP

==Firmware Package 13.0.x==
===Firmware Package 13.0.4 - 12/16/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.0.4-9.3
|-
| Package 9.2||13.0.4-9.2
|-
| Package 9.1||13.0.4-9.1
|-
| Package 9.0||13.0.4-9.0
|-
| Package 8.2||13.0.4-8.2
|}

::1. Updated behavior to allow container hosting for other terminals with no other content configured
::2. Updated kernel bugfix version to better support newer Intel graphics chipsets (Package 9.3)
::3. Updated USB touch module touch direct list to include 28c8:4701
::4. Fixed custom variable messages to ThinServer getting stuck
::5. Fixed location login failed dialog title
::6. Fixed Intel i225 network driver load for single network adapter clients
::7. Fixed keyboards not updating the num lock or caps lock status lights updated in MultiStation.
::8. Fixed lockup for configuration with many camera overlays

===Firmware Package 13.0.3 - 10/10/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.0.3-9.3
|-
| Package 9.2||13.0.3-9.2
|-
| Package 9.1||13.0.3-9.1
|-
| Package 9.0||13.0.3-9.0
|-
| Package 8.2||13.0.3-8.2
|}

::1. Added support for certain Intel Tiger Lake audio chipsets
::2. Added ASEM models to unknown model module
::3. Fixed UI text not displaying properly on HP t510
::4. Fixed camera selection dialog automatically closing after 10 seconds
::5. Fixed MultiMonitor module installation for Arista AP3500
::6. Fixed numlock state getting out of sync for rdesktop RDP client
::7. Fixed prompting for password when password was provided for ThinManager user login via TermMon
::8. Fixed Display Client visibility not updating for add/remove permissions event action

===Firmware Package 13.0.2 - 8/12/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.0.2-9.3
|-
| Package 9.2||13.0.2-9.2
|-
| Package 9.1||13.0.2-9.1
|-
| Package 9.0||13.0.2-9.0
|-
| Package 8.2||13.0.2-8.2
|}

::1. Added support for additional Intel graphics chipsets (Package 9.3)
::2. Added virtual keyboard activation from TermMon ActiveX
::3. Updated focus to remain on main virtual screen during a swap via touchscreen
::4. Fixed camera Display Clients not displaying for clients with Intel graphics (Package 9.2, 9.3)
::5. Fixed terminal restart when receiving switch to Display Client message
::6. Fixed undesired behavior with redirected smartcard readers with FreeRDP

===Firmware Package 13.0.1 - 7/18/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.0.1-9.3
|-
| Package 9.2||13.0.1-9.2
|-
| Package 9.1||13.0.1-9.1
|-
| Package 9.0||13.0.1-9.0
|-
| Package 8.2||13.0.1-8.2
|}

::1. Added support for certain Intel Jasper Lake graphics chipsets (Package 9.3)
::2. Added support for Intel i225 network chipsets (Package 9.3)
::3. Updated monitor connection retry interval to add small random delay
::4. Updated to allow ThinManager user with no content to log into a terminal when the terminal also does not have content
::5. Fixed virtual keyboard scaling option not being honored
::6. Fixed smart card reader hot plug not working (Package 9.1)

===Firmware Package 13.0.0 - 5/23/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||13.0.0-9.3
|-
| Package 9.2||13.0.0-9.2
|-
| Package 9.1||13.0.0-9.1
|-
| Package 9.0||13.0.0-9.0
|-
| Package 8.2||13.0.0-8.2
|}

::1. Added support for event-based content
::2. Improved network interface detection on systems with many network ports
::3. Fixed Belgium AtlGr key not working in certain configurations

==Firmware Package 12.1.x==
===Firmware Package 12.1.4 - 4/4/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||12.1.4-9.3
|-
| Package 9.2||12.1.4-9.2
|-
| Package 9.1||12.1.4-9.1
|-
| Package 9.0||12.1.4-9.0
|-
| Package 8.2||12.1.4-8.2
|}

::1. Added default heartbeat settings for FreeRDP
::2. Fixed Relevance User login hotkey not being honored
::3. Fixed Instant Failover invoking Enforce Primary behavior on secondary server

===Firmware Package 12.1.3 - 2/16/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||12.1.3-9.3
|-
| Package 9.2||12.1.3-9.2
|-
| Package 9.1||12.1.3-9.1
|-
| Package 9.0||12.1.3-9.0
|-
| Package 8.2||12.1.3-8.2
|}

::1. Added support for SATA for DoC boot device option
::2. Fixed USB eGalax touchscreen not functioning after being reconnected while being touched
::3. Fixed Eikon fingerprint readers not working with the DigitalPersona UareU Fingerprint Reader module 
::4. Fixed RemoteFX not being used when using AppLink with FreeRDP

===Firmware Package 12.1.2 - 10/29/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.3||12.1.2-9.3
|-
| Package 9.2||12.1.2-9.2
|-
| Package 9.1||12.1.2-9.1
|-
| Package 9.0||12.1.2-9.0
|-
| Package 8.2||12.1.2-8.2
|}

::1. New firmware package 9.3
::2. Added virtual keyboard option in Selector Menu
::3. Added support for Intel Sunrise Point audio
::4. Improved long terminal boot time if HTTPS port blocked by firewall
::5. Fixed instant failover hotkey combination not working
::6. Fixed primary up delay timer not working when using instant failover
::7. Fixed RD gateway login credentials not being used when specified
::8. Fixed ALT Key gets stuck when used with certain key combinations
::9. Fixed right Alt key work like ctrl + left alt for Polish keyboards
::10. Fixed not being able to interact with the selector menu or virtual keyboard when left mouse button is remapped
::11. Fixed RDP credentials prompt sometimes not always being displayed

===Firmware Package 12.1.1 - 8/4/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.2||12.1.1-9.2
|-
| Package 9.1||12.1.1-9.1
|-
| Package 9.0||12.1.1-9.0
|-
| Package 8.2||12.1.1-8.2
|}

::1. Fixed display clients not starting when booting from ThinManager 10 and earlier
::2. Fixed VNC scaling
::3. Fixed smart card redirection (Package 9.2)

===Firmware Package 12.1.0 - 6/18/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.2||12.1.0-9.2
|-
| Package 9.1||12.1.0-9.1
|-
| Package 9.0||12.1.0-9.0
|-
| Package 8.2||12.1.0-8.2
|}

::1. Added support for running hosting container display servers

==Firmware Package 12.0.x==
===Firmware Package 12.0.4 - 6/18/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.2||12.0.4-9.2
|-
| Package 9.1||12.0.4-9.1
|-
| Package 9.0||12.0.4-9.0
|-
| Package 8.2||12.0.4-8.2
|}

::1. Added option to disconnect RDP session from client interface
::2. Added support for Silicon Motion SM750 graphics chipset
::3. Added module download over HTTPS if available
::4. Added support for Dell/Wyse 5070 extended graphics (package 9.2)
::5. Added WinTMC configuration module
::6. Added support for V311 fingerprint reader
::7. Added support for USB audio headset
::8. Improved Relevance user login/logout time
::9. Improved debug logging
::10. Fixed terminal shadowing for one screen on certain multiple monitor configurations
::11. Fixed Require User to change PIN at next login setting not being honored
::12. Fixed login dialog not getting keyboard focus when opening
::13. Fixed IP camera tile being drawn in the incorrect location when paired with a VNC Display Client
::14. Fixed USB touchscreen selector actions not being available when configured
::15. Fixed Display Client ID being shown instead of name in certain circumstances
::16. Fixed application crash when using the swap virtual screen behavior when selector drop down is disabled
::17. Fixed view-only virtual screen accepting keyboard input in certain circumstances
::18. Fixed on-screen keyboard not sending keys to virtual screens
::19. Fixed switching Display Clients causing focus to be lost when not using the selector drop down
::20. Fixed on-screen keyboard activated by touch hold down action not generating key input when Left Mouse button is mapped.
::21. Fixed configuration change to rotation not forcing a reboot during a restart
::22. Fixed network interface handling for generation 2 Hyper-V virtual machines
::23. Fixed eGalax touchscreen behavior for certain eGalax controllers

===Firmware Package 12.0.0 - 12/11/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.2||12.0.0-9.2
|-
| Package 9.1||12.0.0-9.1
|-
| Package 9.0||12.0.0-9.0
|-
| Package 8.2||12.0.0-8.2
|}

::1. Added support for certain AMD Vega graphics chipsets (Package 9.2)
::2. Added support for connecting to docker container Display Clients
::3. Added support for associating an unknown badge with Relevance User
::4. Added language support for Canadian French
::5. Added generic USB redirection module (beta)
::6. Added additional debug logging
::7. Improved localization support
::8. Improved hotkey configuration handling
::9. Improved handling of Relevance User login process
::10. Fixed 6200T-NA serial port not working without USB keyboard being present
::11. Fixed crash when using FreeRDP and sound modules with certain audio chipsets with HDMI audio
::12. Fixed Unified Video module not displaying install errors properly
::13. Fixed graphics issue with HP T530 by disabling display core for Radeon R2 Graphics chipset 
::14. Fixed instant failover for workstation Display Clients

==Firmware Package 11.2.x==
===Firmware Package 11.2.1 - 8/21/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.1||11.2.1-9.1
|-
| Package 9.0||11.2.1-9.0
|-
| Package 8.2||11.2.1-8.2
|}

::1. Added support for RFIdeas RDR-80581AKU card reader
::2. Added support for microphone redirection when using FreeRDP
::3. Improved USB touchscreen module to better handle composite devices
::4. Fixed screen size calculation at startup for certain configurations
::5. Fixed firmware not being able to go into graphics mode when running as a VMWare virtual machine
::6. Fixed RDP port module setting not being honored by FreeRDP
::7. Fixed mouse button mapping applied incorrectly
::8. Fixed Relevance Logon windowlosing input focus
::9. Fixed FreeRDP connection to Windows Server2012 when configured to span to multiple monitors (not using extended desktop)
::10. Fixed crash when using touchscreen causing a boot loop (Package 9.1)
::11. Fixed crash when using a client with newer AMD graphics under certain circumstances (Package 9.1)
::12. Fixed crash when configured to use IP cameras using video acceleration (Package 9.1)

===Firmware Package 11.2.0 - 5/29/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.1||11.2.0-9.1
|-
| Package 9.0||11.2.0-9.0
|-
| Package 8.2||11.2.0-8.2
|}

::1. Added support for portrait monitor layout for supported hardware (Platform 9.1)
::2. Added support for TLS in terminal monitor protocol encryption negotiation
::3. Updated kernel configuration to support running as a Microsoft Hyper-V guest
::4. Fixed TermMon ActiveX controls for virtual screens and camera overlays not working as expected
::5. Fixed TMTerm DLL Configuration module not being included in package
::6. Fixed issue with multiple USB touchscreens where after calibration the first touched screen does not work as expected 
::7. Fixed touchscreen driver installation for Atmel maxTouch

==Firmware Package 11.1.x==
===Firmware Package 11.1.7 - 3/27/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.0||11.1.7-9.0
|-
| Package 8.2||11.1.7-8.2
|}

::1. Added English (UK) language module
::2. Added monitor detection breakout
::3. Added blocklist option to USB touchscreen module
::4. Added additional debug logging
::5. Updated Nymi band module to include NBE application and server url configuration option
::6. Fixed keyboard covering login prompt on certain aspect ratio displays
::7. Fixed manual logon setting in RF Ideas USB module not being honored
::8. Fixed configuration download failed for very large terminal configurations
::9. Fixed login dialog not exiting immediately on card scan
::10. Fixed cursor disappearing in certain environments in rdesktop
::11. Fixed terminal not rebooting during a restart after changing configured language
::12. Fixed smart card redirection in FreeRDP client
::13. Fixed FreeRDP client not honoring NLA or Draw in Background settings from the RDP experience module
::14. Fixed VersaView 6200T-KB freezing during a reboot

===Firmware Package 11.1.4 - 1/31/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.0||11.1.4-9.0
|-
| Package 8.2||11.1.4-8.2
|}

::1. Added brightness control for integrated panels that don't support DDC
::2. Added support for Enable NLA and Draw in Background options for the FreeRDP client
::3. Added debug logging for terminal configuration
::4. Changed FreeRDP client to only enable RemoteFX when color depth is set to 16M colors
::5. Fixed missing or corrupted text with Intel graphics in the RDP client
::6. Fixed Turkish Q keyboard layout
::7. Fixed crash when shadowing configuration with six or more screens
::8. Fixed login prompt displaying twice after reaching the connection timeout for the FreeRDP client

===Firmware Package 11.1.3 - 12/5/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.0||11.1.3-9.0
|-
| Package 8.2||11.1.3-8.2
|}

::1. Added Turkish language support
::2. Added support for Intel SST Audio devices
::3. Added FreeRDP as advanced module
::4. Fixed hardware acceleration for Intel graphics
::5. Fixed potential system hang for Wyse 3040
::6. Fixed issue that prevented Eikon fingerprint readers from functioning
::7. Fixed NLA credential dialog not being shown in certain cases
::8. Fixed Alt Gr not working
::9. Fixed DisplayLink module not being included in firmware package
::10. Fixed DDC monitor brightness control not being set by TermMon ActiveX Control

===Firmware Package 11.1.1 - 9/25/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Package 9.0||11.1.1-9.0
|-
| Package 8.2||11.1.1-8.2
|}

::1. Added support for ThinManager VNC servers
::2. Added USB serial support for Mettler Toledo scales
::3. Fixed camera label location when swapping virtual screens
::4. Fixed camera label not initially being shown on startup
::5. Fixed missing USB Touch Screen Driver configuration touch hold down setting
::6. Fixed RFID badge login prompting for password when user and module had conflicting settings (prefer user setting)
::7. Fixed USB Touch Screen Driver unloading for certain Lenovo touch screens
::8. Fixed selector menu not responding to touch when using a touch screen
::9. Fixed long usernames being truncated when being redirected by broker
::10. Fixed u.are.u DP5160 fingerprint reader not working under package 9.0
::11. Fixed USB flash drives showing up multiple times when unplugged and replugged
::12. Fixed package 9.0 not working for certain AMD gpu based clients
::13. Fixed issue with Display Clients not starting on bootup

=Container Images=
==Container Images 14.0.x==
===Container Images 14.0.1 - 9/26/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||14.0.1.161
|-
| Firefox||14.0.1.161
|-
| Chrome with Citrix Receiver||14.0.1.161
|-
| Firefox with Citrix Receiver||14.0.1.161
|}

::1. Updated to Chrome 128
::2. Updated to Firefox 129

===Container Images 14.0.0 - 5/22/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||14.0.0.155
|-
| Firefox||14.0.0.155
|-
| Chrome with Citrix Receiver||14.0.0.155
|-
| Firefox with Citrix Receiver||14.0.0.155
|}

::1. Updated to Chrome 123
::2. Updated to Firefox 124

==Container Images 13.2.x==
===Container Images 13.2.3 - 2/27/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||13.2.3.152
|-
| Firefox||13.2.3.152
|-
| Chrome with Citrix Receiver||13.2.3.152
|-
| Firefox with Citrix Receiver||13.2.3.152
|}

::1. Updated to Chrome 121
::2. Updated to Firefox 122

===Container Images 13.2.1 - 11/6/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||13.2.1.137
|-
| Firefox||13.2.1.137
|-
| Chrome with Citrix Receiver||13.2.1.137
|-
| Firefox with Citrix Receiver||13.2.1.137
|}

::1. Updated to Chrome 118
::2. Updated to Firefox 118

===Container Images 13.2.0 - 9/20/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||13.2.0.134
|-
| Firefox||13.2.0.134
|-
| Chrome with Citrix Receiver||13.2.0.134
|-
| Firefox with Citrix Receiver||13.2.0.134
|}

::1. Updated to Chrome 116
::2. Updated to Firefox 117

==Container Images 13.1.x==
===Container Images 13.1.0 - 2/2/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||13.1.0.123
|-
| Firefox||13.1.0.123
|-
| Chrome with Citrix Receiver||13.1.0.123
|-
| Firefox with Citrix Receiver||13.1.0.123
|}

::1. Added signature to container image
::2. Updated to Chrome 108
::3. Updated to Firefox 108

==Container Images 13.0.x==
===Container Images 13.0.1 - 6/30/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||13.0.1.101
|-
| Firefox||13.0.1.101
|-
| Chrome with Citrix Receiver||13.0.1.101
|-
| Firefox with Citrix Receiver||13.0.1.101
|}

::1. Updated Chrome to 103.0.5060.53
::2. Updated Firefox to 101.0.1
::3. Updated Citrix ICA client to 22.5.0.16

===Container Images 13.0.0 - 5/23/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||13.0.0.93
|-
| Firefox||13.0.0.93
|-
| Chrome with Citrix Receiver||13.0.0.93
|-
| Firefox with Citrix Receiver||13.0.0.93
|}

::1. Added method to install custom CA certificates
::2. Updated Chrome to 101.0.4951.64
::3. Updated Firefox to 99.0

==Container Images 12.1.x==
===Container Images 12.1.2 - 2/16/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| Chrome||12.1.2.67
|-
| Firefox||12.1.2.67
|-
| Chrome with Citrix Receiver||12.1.2.67
|-
| Firefox with Citrix Receiver||12.1.2.67
|}

::1. Updated Chrome to 96.0.4664.110
::2. Updated Firefox to 95

=WinTMC=
==WinTMC 13.2.x==
===WinTMC 13.2.1 - 9/24/2024===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||13.2.1.1
|-
| ThinClientService||13.2.1.11
|-
| WinTMCShadow||13.2.1.11
|}

::1. Added additional logging for Bluetooth resolvers
::2. Updated VLC library versions
::3. Fixed connection string not being sent to TermMon ActiveX connections
::4. Fixed tab order and default button on user login password dialog
::5. Fixed connection string not including display client name mapping
::6. Fixed connection string not including permanent display client windows usernames
::7. Fixed nun-interactive user login prompting for password

===WinTMC 13.2.0 - 9/28/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||13.2.0.2730
|-
| ThinClientService||13.2.0.2730
|-
| WinTMCShadow||13.2.0.2730
|}

::1. Added support for Device Authentication
::2. Added additional logging to BTLE resolver management
::3. Fixed Display Client display names being display improperly in a Virtual Screen selector dropdown
::4. Fixed ping being sent to RDS host when connecting through an RD Gateway
::5. Fixed wifi resolver status not being updated without Bluetooth resolvers being enabled

==WinTMC 13.1.x==
===WinTMC 13.1.0 - 2/7/2023===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||13.1.0.2544
|-
| ThinClientService||13.1.0.2544
|-
| WinTMCShadow||13.1.0.2544
|}

::1. Added support for e-signature
::2. Improved on-screen keyboard invocation
::3. Improved shadow server shutdown process
::4. Fixed camera selection dialog for overlays configured for a camera group

==WinTMC 13.0.x==
===WinTMC 13.0.0 - 8/19/2022===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||13.0.0.2500
|-
| ThinClientService||13.0.0.2500
|-
| WinTMCShadow||13.0.0.2500
|}

::1. Added support for event-based content delivery
::2. Improved on-screen keyboard activation behavior for newer versions of Windows
::3. Improved behavior when connecting to an offline VNC server
::4. Updated selector activation size to be easier to activate on touchscreens
::5. Fixed certain container Display Clients not connecting
::6. Fixed ThinManager user not being logged out when logging into another terminal
::7. Fixed handling of switch to specific Display Client message from TermMon ActiveX

==WinTMC 12.1.x==
===WinTMC 12.1.0 - 6/25/2021===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||12.1.0.2379
|-
| ThinClientService||12.1.0.2379
|-
| WinTMCShadow||12.1.0.2379
|}

::1. Added localization support
::2. Added support for connecting to container Display Clients
::3. Added support for microphone redirection
::4. Added WinTMC settings module support
::5. Added option to change the RDP client reconnection behavior
::6. Added support for improved relevance user login process
::7. Improved overlay handling
::8. Improved VNC server startup failure due to insufficient permissions handling
::9. Improved handling of VNC server startup when no clients attempt to connect after request
::10. Fixed TermMon ActiveX camera controls not being honored
::11. Fixed camera status not being updated after initial connection
::12. Fixed fullscreen behavior for certain overlays
::13. Fixed OK button behavior for camera selection when no camera selected
::14. Fixed camera cycling not working for cycle times shorter than five seconds
::15. Fixed camera title not being displayed
::16. Fixed camera cycle button not being displayed
::17. Fixed error message when connecting to older ThinManager servers
::18. Fixed error message on standard VNC connection failures

==WinTMC 5.x==
===WinTMC 5.2.1 - 8/14/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||5.2.1.2030
|-
| ThinClientService||5.2.1.2030
|-
| WinTMCShadow||5.2.1.2030
|}

::1. Fixed  hotkeys not being applied when using MultiMonitor
::2. Fixed RTSP over HTTP and RTSP over TCP camera protocols not connecting
::3. Fixed using the Microsoft credential prompt locking up the user interface
::4. Fixed user configuration being retained through a reboot
::5. Fixed application crash when scanning for QR code resolvers 

===WinTMC 5.2.0 - 5/29/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||5.2.0.1924
|-
| ThinClientService||5.2.0.1924
|-
| WinTMCShadow||5.2.0.1924
|}

::1. Added support for portrait monitor layout
::2. Added TLS to security type negotiation for terminal shadow and VNC connections
::3. Fixed not being able to manage or delete ThinManager servers from server list
::4. Fixed shadow port setting not being honored

===WinTMC 5.1.0 - 1/17/2020===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||5.1.0.1753
|-
| ThinClientService||5.1.0.1753
|-
| WinTMCShadow||5.1.0.1753
|}

::1. Added support for FTA license checkout (FactoryTalk View SE)
::2. Fixed camera overlays sometimes not being created when connecting to ThinManager 11.0 and later
::3. Fixed minor memory leak during terminal restart when using camera overlays

===WinTMC 5.0.1 - 11/11/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||5.0.1.1669
|-
| ThinClientService||5.0.1.1669
|-
| WinTMCShadow||5.0.1.1669
|}

::1. Updated to allow the use of more than 2GB of memory for large configurations

===WinTMC 5.0.0 - 10/11/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||5.0.0.1586
|-
| ThinClientService||5.0.0.1586
|-
| WinTMCShadow||5.0.0.1586
|}

::1. Added installation option to only install thin client service to act as ThinManager VNC server
::2. Added support for ThinManager VNC servers
::3. Added ctrl+alt+end as blocked hotkey when ctrl+alt+del is being blocked
::4. Added new logging framework
::5. Improved VNC server and integrated into the thin client service
::6. Improved flow of main menu with no default Display Clients
::7. Fixed Relevance User login for AD linked users when the user's display name didn't match username
::8. Fixed resolver IDs being sent incorrectly
::9. Fixed keyboard hotkeys and mouse mapping not being applied

==WinTMC 4.x==
===WinTMC 4.1.1 - 6/20/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||4.1.1.1403
|-
| ThinClientService||4.1.1.1403
|}

::1. Fixed hidden Display Clients being shown on startup
::2. Fixed MultiMonitor configurations starting off-screen after previous fullscreen configuration
::3. Fixed Display Client display name in RDS login prompt title

===WinTMC 4.1.0 - 5/17/2019===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||4.1.0.1354
|-
| ThinClientService||4.1.0.1354
|}

::1. Added support for Display Client display names
::2. Added support for Unicode characters to support ThinManager internationalization
::3. Added support for Codabar barcode format
::4. Added support for barcode configuration module settings for prepend/append to scans
::5. Improved terminal status messaging
::6. Improved event messaging to ThinManager
::7. Improved handling of fatal RDP ActiveX errors
::8. Fixed incorrect session scaling when only one dimension is larger
::9. Fixed not being able to close after deleting last ThinManager server
::10. Fixed terminal shadow port not being honored
::11. Fixed terminal shadow of a single screen
::12. Fixed user-based and location-based tile settings

===WinTMC 4.0.0 - 12/18/2017===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||4.0.0.0
|-
| ThinClientService||4.0.0.0
|}

::1. Added [[Virtual Screens]]
::2. Added Tiling
::3. Added IP Camera streaming, MJPG and RTSP streams
::4. Added local USB Cameras and broadcasting
::5. Added mouse button mapping
::6. Added session scaling<sup>1</sup>
::7. Added Relevance User authorization caching
::8. Added Relevance User PIN pad login
::9. Added Relevance User Single Sign On with FactoryTalk
::10. Added Relevance User option to change password from client
::11. Added MultiSession Screensaver module
::12. Added Individual Key Block module
::13. Added preliminary support for Key Block module
::14. Updated barcode scanning to work with all versions of Windows
::15. Updated TermMon ActiveX support
::16. Updated [[Display Clients]] as individual window support
::17. Updated installer to not require any additional prerequisites on Windows Server<sup>2</sup>
::18. Fixed Wifi relevance resolvers [[reporting]] incorrect BSSID with a leading 0.
::19. Fixed [[Display Clients]] sometimes starting at bootup when configured to not
::20. Fixed Relevance User login for certain AD linked users
::21. Fixed incorrect report of [[VNC]] [[Display Client]] status

-----
Note: Starting with this version, Windows XP is no longer supported.<br>
<sup>1</sup> Due to limitations of the RDP ActiveX, scaling RDP [[display clients]] larger will force maintain aspect ratio.<br>
<sup>2</sup> For Windows Server operating systems, the Wireless LAN Service feature must be enabled to use Wifi Relevance Resolvers.
-----

==WinTMC 3.x==
===WinTMC 3.1.2 - 11/4/2016===

::1. Fixed issue with installer that could cause the service to be unregistered after being run by a non-administrator user.

===WinTMC 3.1.1 - 6/8/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||3.1.1.0
|}

::1. Updated the add ThinManager server dialog to verify connection and check for certain invalid entries before completing.
::2. Fixed issue where certain configurations could cause an 'invalid argument' error or application crash.
::3. Fixed issue where shadow [[display clients]] with multiple terminals wouldn't prompt to reselect after ending session.
::4. Fixed End Shadow option not being immediately available for shadow [[display clients]].

===WinTMC 3.1.0 - 5/6/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||3.1.0.0
|}

::1. Added RD Gateway support.
::2. Fixed issue with interactive shadow of a terminal running firmware package 5.

===WinTMC 3.0.1 - 3/21/2016===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||3.0.1.0
|-
| ThinClientService||3.0.1.0
|}

::1. Added support for Relevance. (Resolvers under Windows 10 and newer)
::2. Added support for [[VNC]] [[Display Clients]] (ThinManager 9.0 and newer)
::3. Added support for rotating password via Active Directory integration.
::4. Added barcode scanning data into session via device camera. (Windows 8 and newer)
::5. Added On-Screen Keyboard button to selector window. (Single monitor Windows 8 and newer)
::6. Added location and user login and logout sounds.
::7. Added support for defining multiple ThinManager systems in the configuration menu.
::8. Added support for requiring authentication to change local application settings.
::9. Changed to MSI installer to allow for unattended installations.
::10. Fixed issue with selector window buttons not showing properly when starting in fullscreen.
::11. Fixed issue with selector drop down not being resized properly when switching between windowed and fullscreen.

==WinTMC 2.x==
===WinTMC 2.3.1.0 - 9/9/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||2.3.1.0
|}

::1. Fixed issue with terminal to terminal shadow [[display clients]] not connecting.

===WinTMC 2.3.0.0 - 8/7/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||2.3.0.0
|-
| ThinClientService||2.1.1.0
|}

::1. Added support for [[Network Level Authentication]].
::2. Added [[reporting]] of configuration version number to ThinManager to update terminal restart required icon.
::3. Changed selector to support high DPI displays.
::4. Fixed issue with [[reporting]] of [[Display Client]] status to ThinManager.
::5. Fixed issue with starting in fullscreen mode sometimes not displaying selector buttons.

===WinTMC 2.2.0.9 - 6/26/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||2.2.0.9
|-
| ThinClientService||2.1.0.9
|}

::1. Changed firmware version and boot loader version reported to ThinManager.
::2. Changed error related to Windows RDS licensing to be more accurate.
::3. Fixed potential crash when no configuration is set.

-----
Note: Starting with this version, ThinManager 6.0 and 7.0 must be set to use Firmware Package 5 for [[WinTMC]].
-----

===WinTMC 2.2.0.8 - 6/9/2015===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||2.2.0.8
|-
| ThinClientService||2.1.0.8
|}

::1. Changed firmware version and boot loader version reported to ThinManager.
::2. Fixed quote trimming of initial application to reflect terminal behavior.
::3. Fixed crash related to protocol version negotiation with ThinManager 8.0 initial release.

===WinTMC 2.2.0.6 - 9/3/2014===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||2.2.0.6
|-
| ThinClientService||2.1.0.7
|}

::1. Added hide Microsoft RDP connection bar.
::2. Fixed blank error message related to disconnecting a session.

===WinTMC 2.2.0.4 - 3/25/2013===
{| {{table}}
| align="center" style="background:#f0f0f0;"|'''Component'''
| align="center" style="background:#f0f0f0;"|'''Build'''
|-
| [[WinTMC]]||2.2.0.4
|-
| ThinClientService||2.1.0.6
|}

::1. Added support for RDP Port Module.
::2. Fixed Enforce Primary and associated warning messages.]
::3. Fixed application hang related to Windows 7 update.
::4. Fixed application error related to hotkeys.

=aTMC=
==aTMC 1.x==
===aTMC 1.2.5 - 10/13/2020===
::1. Fixed a freeze that could occur while a camera Display Client was in the foreground.

===aTMC 1.2.4 - 12/4/2019===
::1. Fixed an issue with Display Client session not showing after a successful connection.
::2. Fixed crash when shadowing terminal from ThinManager before a session is created. 

===aTMC 1.2.3 - 11/11/2019===
::1. Changed target version to Android 10.
::2. Fixed issue with location access not being granted when retrieving router BSSID.
::3. Fixed Activate Display Client on login not always working.
::4. Fixed ANR on Android 10 devices.

===aTMC 1.2.1 - 8/23/2019===
::1. Added support for 64-bit only devices.

===aTMC 1.2.0 - 7/31/2019===
::1. Added full Display Client camera support.
::2. Added support for append, prepend, and decode options in Barcode Module.
::3. Fixed shadowing a single screen on a multi-monitor terminal.

===aTMC 1.1.7 - 5/16/2019===
::1. Added support for setting monitor brightness. 
::2. Fixed crash when terminal responded with an empty environment variable.
::3. Fixed crash occurring on Android 9.0 Pie.
::4. Fixed Activating Display Client on login when not using DisplayName.

===aTMC 1.1.6 - 3/5/2019===
::1. Added support for log event messages.
::2. Added support for FTA licenses. 
::3. Added support for full-screen camera Display Clients.
::4. Changed Android target version to 8.0 Oreo.
::5. Added support for requesting required permission access on Android. 

===aTMC 1.1.5 - 7/30/2018===
::1. Changed BSSID to all uppercase. 
::2. Added support for Display Name.
::3. Added support for screen rotation.
::4. Fixed an issue where cancelling a terminal selection didn't cause a disconnect from ThinServer.

===aTMC 1.1.4 - 4/30/2018===
::1. Added support for physical keyboards.
::2. Added support for pin prompt size and orientation.
::3. Added support for Press Release Interval setting in TouchTablet Module.
::4. Added support for custom variables.
::5. Added support for Barcode Module.
::6. Fixed crash when using touch pointer.
::7. Fixed pinch zoom not centering between fingers. 
::8. Fixed issue when closing software keyboard while in full-screen.

===aTMC 1.1.3 - 8/29/2017===
::1. Added credential verification when changing a non-AD users TermSecure password.
::2. Added support for Pin Prompt when logging in a TemrSecure user.
::3. Added support for Activate Display Client at Login. 
::4. Fixed crash when passing input to a disconnected RPD session.

===aTMC 1.1.2 - 7/31/2017===
::1. Added support for AltBeacon.
::2. Added extended keyboard.
::3. Added support for TouchTablet Module.
::4. Improved multi-touch gestures.

===aTMC 1.1.0 - 3/1/2017===
::1. Added support for allowing terminal to sleep.
::2. Added Pause/Resume during Bluetooth beacon scanning.
::3. Changed minimum Android version to 5.0 Lollipop.

===aTMC 1.0.6 - 9/7/2016===
::1. Added multi-touch gestures.
::2. Added support for RDP Port Module.
::3. Added support for VNC Shadowing.
::4. Added support for retrieving desktop name.
::5. Fixed issue with terminal staying disabled.

=TermMon=
==TermMon ActiveX 13.x==
===TermMon 13.1.0 - 2/2/2023===
::1. Added support for e-signature
::2. Added Logix PinPoint method
::3. Added method to activate on-screen keyboard
::4. Updated FTA license checkout timeout

===TermMon 13.0.0 - 5/23/2022===
::1. Added support for event-based content
::2. Added SetCustomVariable2

==TermMon ActiveX 7.x==
===TermMon 7.11.0 - 8/14/2020===
::1. Added GetCurrentDisplayClientServer
::2. Added CurrentTerminalServerGroupServer

===TermMon 7.10.1 - 12/16/2019===
::1. Updated certificate check for FTA license checkout

===TermMon 7.10.0 - 7/16/2019===
::1. Added heartbeat timeout and threshold settings
::2. Added logging of message handler exceptions

===TermMon 7.9.2 - 4/17/2019===
::1. Added SetDisplayBrightness method (DDC)

===TermMon 7.9.0 - 4/10/2019===
::1. Added support for "Enable User Change Events" setting from TermMon module

===TermMon 7.8.0 - 12/21/2018===
::1. Added IntouchLogin method
::2. Added logging
::3. Added support for connections from ThinManager 10.0 and newer
::4. Improved OnTermSecureUserChange being fired when RDP session is disconnected or reconnected

===TermMon 7.7.1 - 9/13/2018===
::1. Fixed user account format when domain field is empty

===TermMon 7.7.0 - 8/14/2018===
::1. Added RequestLicense method for FTA licenses (FactoryTalk View SE)

===TermMon 7.6.2 - 7/25/2018===
::1. Changed account passed to FTView and iFix to SAM account

===TermMon 7.6.1 - 1/16/2018===
::1. Fixed resource issue when multiple instances of the control were used in the same process

=ThinManager Logix PinPoint=
==PinPoint 1.x==
===PinPoint 1.1.0 - 8/28/2024===
::1. Added support for FBD, SFC, and SEQ languages
::2. Added option to start UI minimized
::3. Added additional logging
::4. Improved event performance for large projects
::5. Updated UI to display more detailed connection state
::6. Fixed crash when running on a system without TermMon registered