Welcome to the ThinManager Knowledgebase.
Additional knowledgebase articles can be found at Rockwell Automation Tech Support.

If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201.

Difference between revisions of "Card Readers"

From ThinManager Knowledge Base
Jump to: navigation, search
 
(32 intermediate revisions by 7 users not shown)
Line 1: Line 1:
−
Presently, ThinManager supports the RDR-xx81AKx family of RFID readers which includes:
+
[[Category:ThinManager]]
  
 +
 +
Presently, ThinManager supports a large selection of the RFIDeas RDR family of card readers. To use these devices add to the terminal profile either the RF Ideas pcProx Module for serial readers or the RF Ideas pcProx USB Module for USB readers. Supported RFIDeas pcProx readers:
  
 
{| class="wikitable"
 
{| class="wikitable"
 
|-
 
|-
−
! scope="col"| Product ID
+
! scope="col"| Module Selection
 +
! scope="col"| Module Drop-Down Selection
 +
! scope="col"| Catalog Number
 +
! scope="col"| PID
 
! scope="col"| Interface
 
! scope="col"| Interface
−
! scope="col"| Package Requirements
+
! scope="col"| Package Support
 +
! scope="col"| Format
 +
|-
 +
|RF Ideas pcProx Module
 +
|N/A
 +
|RDR-6081-AK2
 +
|
 +
|Serial
 +
|6.0 or newer
 +
|HID/HID2
 +
|-
 +
| rowspan="42"| RF Ideas pcProx USB Module
 +
| rowspan="22"| RDR-6011AKU<br>or<br>RDR-6081AKU
 +
| RDR-6011AKU
 +
| rowspan="22"| 0C27-3BFA
 +
| rowspan="22"| USB
 +
| rowspan="22"| 7.1.4 or newer
 +
| rowspan="22"| HID/HID2
 +
|-
 +
| RDR-6021AKU
 +
|-
 +
| RDR-6081AKU       
 +
|-
 +
| RDR-6081AKU-C06   
 +
|-
 +
| RDR-6081AKU-C16   
 +
|-
 +
| RDR-7011AKU
 +
|-
 +
| RDR-7511AKU
 +
|-
 +
| RDR-7581AKU       
 +
|-
 +
| RDR-7581AKU-C06   
 +
|-
 +
| RDR-80081AKU     
 +
|-
 +
| RDR-80081AKU-C06 
 +
|-
 +
| RDR-80081AKU-C16
 +
|-
 +
| RDR-800W1AKU     
 +
|-
 +
| RDR-800W1AKU-C72 
 +
|-
 +
| RDR-800W1AWU
 +
|-
 +
| RDR-80581AKU     
 +
|-
 +
| RDR-80581AKU-C06 
 +
|-
 +
| RDR-80581AKU-C16 
 +
|-
 +
| RDR-805H1AKU 
 +
|-
 +
| RDR-805W1AKU     
 +
|-
 +
| RDR-805W1AKU-C72 
 +
|-
 +
| RDR-805W1AWU
 +
|-
 +
| rowspan="16"| RDR-80582AK0<br>or<br> RDR-80082AK0
 +
| RDR-7581AK0
 +
| rowspan="18"| 0C27-232A
 +
| rowspan="18"| USB CDC Virtual COM
 +
| rowspan="18"| 7.1.4 or newer
 +
| rowspan="18"| HID/HID2
 
|-
 
|-
−
! scope="row"| RDR-6081AK2
+
| RDR-80081AK0
−
| Serial
 
−
| Package 5 or 6
 
 
|-
 
|-
−
! scope="row"| RDR-6081AKU
+
| RDR-80081AK0-C06
−
| Universal Serial Bus (USB)
 
−
| Package 5 or 6
 
 
|-
 
|-
−
! scope="row"| RDR-80582AK0
+
| RDR-80081AK0-C16
−
| Universal Serial Bus (USB)
+
|-
−
| Package 6
+
| RDR-80082AK0
 +
|-
 +
| RDR-80082AK0-C16
 +
|-
 +
| RDR-800W1AK0
 +
|-
 +
| RDR-800W1AW0
 +
|-
 +
| RDR-800W2AK0
 +
|-
 +
| RDR-800W2AW0
 +
|-
 +
| RDR-80581AK0
 +
|-
 +
| RDR-80582AK0
 +
|-
 +
| RDR-805W1AK0
 +
|-
 +
| RDR-805W1AK0-C72
 +
|-
 +
| RDR-805W1AW0
 +
|-
 +
| RDR-805W2AK0
 
|}
 
|}
 +
  
 
==Configuration Considerations==
 
==Configuration Considerations==
−
Facility Code. Serial can read it, USB can't. Turn off if you have USB or mixed devices.
+
If you are using a Facility Code, you will need to use a Serial based reader, USB will not read the code. If you are using mixed devices (serial and USB) you should turn off the Facility Code.
 +
 
 +
==Integration with Relevance User Security==
 +
One badge can be associated with one Relevance user. So when a badge is scanned, the associated Relevance user is automatically logged into Relevance Security.
 +
 
 +
This can be done manually with the Relevance User Configuration Wizard, which can be launched by double clicking the Relevance user of interest. On the Card / Badge Information page of this wizard, simply check the "This user will use a card, badge, or other device to log in" checkbox. Then manually enter the badge number to be associated with the Relevance user. Click Finish.
 +
 
 +
To require a password in addition to the card scan, simply check the "Always Prompt for Password" checkbox - this enables Multi-Factor Authentication (something you have plus something you know).
 +
 
 +
ThinManager can also be configured to prompt an Administrator to perform this association when a new badge is scanned. To enable this option in ThinManager 7 and later, click the View ribbon, followed by the Options button. Check the "Display "Create New User" dialog for unknown users" option and click OK.

Latest revision as of 15:58, 22 February 2019


Presently, ThinManager supports a large selection of the RFIDeas RDR family of card readers. To use these devices add to the terminal profile either the RF Ideas pcProx Module for serial readers or the RF Ideas pcProx USB Module for USB readers. Supported RFIDeas pcProx readers:

Module Selection Module Drop-Down Selection Catalog Number PID Interface Package Support Format
RF Ideas pcProx Module N/A RDR-6081-AK2 Serial 6.0 or newer HID/HID2
RF Ideas pcProx USB Module RDR-6011AKU
or
RDR-6081AKU 		RDR-6011AKU 0C27-3BFA USB 7.1.4 or newer HID/HID2
RDR-6021AKU
RDR-6081AKU
RDR-6081AKU-C06
RDR-6081AKU-C16
RDR-7011AKU
RDR-7511AKU
RDR-7581AKU
RDR-7581AKU-C06
RDR-80081AKU
RDR-80081AKU-C06
RDR-80081AKU-C16
RDR-800W1AKU
RDR-800W1AKU-C72
RDR-800W1AWU
RDR-80581AKU
RDR-80581AKU-C06
RDR-80581AKU-C16
RDR-805H1AKU
RDR-805W1AKU
RDR-805W1AKU-C72
RDR-805W1AWU
RDR-80582AK0
or
RDR-80082AK0 		RDR-7581AK0 0C27-232A USB CDC Virtual COM 7.1.4 or newer HID/HID2
RDR-80081AK0
RDR-80081AK0-C06
RDR-80081AK0-C16
RDR-80082AK0
RDR-80082AK0-C16
RDR-800W1AK0
RDR-800W1AW0
RDR-800W2AK0
RDR-800W2AW0
RDR-80581AK0
RDR-80582AK0
RDR-805W1AK0
RDR-805W1AK0-C72
RDR-805W1AW0
RDR-805W2AK0


Configuration Considerations

If you are using a Facility Code, you will need to use a Serial based reader, USB will not read the code. If you are using mixed devices (serial and USB) you should turn off the Facility Code.

Integration with Relevance User Security

One badge can be associated with one Relevance user. So when a badge is scanned, the associated Relevance user is automatically logged into Relevance Security.

This can be done manually with the Relevance User Configuration Wizard, which can be launched by double clicking the Relevance user of interest. On the Card / Badge Information page of this wizard, simply check the "This user will use a card, badge, or other device to log in" checkbox. Then manually enter the badge number to be associated with the Relevance user. Click Finish.

To require a password in addition to the card scan, simply check the "Always Prompt for Password" checkbox - this enables Multi-Factor Authentication (something you have plus something you know).

ThinManager can also be configured to prompt an Administrator to perform this association when a new badge is scanned. To enable this option in ThinManager 7 and later, click the View ribbon, followed by the Options button. Check the "Display "Create New User" dialog for unknown users" option and click OK.

Retrieved from "https://kb.thinmanager.com/index.php?title=Card_Readers&oldid=8819"