Release Notes

ThinManager 7.0

Service Pack 5

Component	Build
ThinManager	7007
ThinServer	7005
TermCap	7.0.10
Package 7	7.0.9

ThinManager

1. Fixed linked application browse button issue when the file path also contained arguments.

ThinServer

1. Fixed issue where shadowing from the slave ThinManager server could cause the client to no longer be able to be shadowed from ThinManager.

2. Fixed auto-synchronization sometimes failing when using server names with DNS.

Packages

1. Improved performance with cycling IP cameras.

TermCap

1. Added Logic Supply ML210G-10.

2. Added additional available session resolutions for iTMC and WinTMC.

Service Pack 4

Component	Build
ThinManager	7006
ThinServer	7004
TermCap	7.0.8
Package 7	7.0.8

ThinManager

1. Fixed configuration tab not updating for Display Clients.

2. Fixed delete demo codes.

3. Fixed manual synchronization to prevent message boxes for module installation.

4. Fixed navigation in Terminal Configuration Wizard when using Workstation Display Clients.

5. Fixed clear event log from ThinManager server tree.

6. Fixed terminal editing and commands from Display Servers tree.

7. Fixed renaming of Display Client from Location tree.

8. Fixed application button.

9. Improved handling of terminal shadow start-up to prevent failed connection attempt.

10. Improved speed of tree searches.

ThinServer

1. Fixed issue detecting incorrect ThinManager server attempting to auto-synchronize.

2. Fixed generating configuration for Workstation Display Clients when using DNS.

3. Fixed generating URL for camera configuration.

4. Fixed terminal replacement not showing groups when using replace with like terminals only setting.

5. Fixed CPU utilization issue when IP Address range is full when using PXE.

6. Improved SmartSession algorithm for large number of terminals.

7. Improved TFTP transfer speed when using PXE.

Service Pack 3

Component	Build
ThinManager	7005
ThinServer	7003
TermCap	7.0.5
Package 7	7.0.5

ThinManager

1. Fix terminal servers “status” tab event registration. Tab was not updating automatically.

2. Fix Display Client “config” tab event registration.

3. Fix navigation in camera Display Client wizard.

4. Fix the enabled/disabled status of the Modify button in the ribbon bar when “ThinManager Servers” node is selected.

5. Modified initialization of the application button. Now starts out red.

6. Fixed problem with 64-bit ThinManager that was causing connection status to be displayed incorrectly.

7. Make sure all report selections are initialized.

8. Fix camera connection tab. Make sure IE active x control was terminated when leaving the tab.

9. Fixed terminal tree and terminal servers tree when “Show Connected Only” selected.

10. Added support for RTSP IP cameras in the camera wizard.

ThinServer

1. Fix location based display clients with camera overlays.

2. Allow entry in the reservation table to count as a “known client” is PXE server

3. Added support of RTSP IP cameras.

Packages

1. Added support for RTSP IP cameras

TermCap

1. Added Advantech UNO-2362G

2. Added support for Intel Valleyview video chips

3. Added support for AMD Radeon E6460

Service Pack 2

Component	Build
ThinManager	7003
ThinServer	7002

ThinManager

1. Fix information displayed in details pane for terminal groups

2. Fix navigation in Display Client Wizard, when no Relevance license is present.

3. Fix bitmaps in ribbon bar so that they have correct transparency under Aero.

4. Enhance performance of shadowing a terminal or screen

5. Fix behavior when all ThinManager servers removed

6. Fix behavior of details panes that were docked differently from the default.

ThinServer

1. Fix use of demo code on a synchronized pair of ThinManager servers.

2. Fix how permissions applied to display clients when determining if display client is accessible.

Packages

1. Added Locate Pointer module (Package 7)

TermCap

1. Added Arista AP3500

2. Added Intel NUC DC5342HYE

Service Pack 1

Component	Build
ThinManager	7001
ThinServer	7001
Package 7	7.0.3
Package 6	6.0.15

ThinManager

1. Fix problem with username/password/domain overrides for User and/or Location based Display Clients

2. Fix window title of torn-off tabs. Was not updating.

3. Fix problem with shadowing of Screens. Was not always establishing shadow connection correctly.

4. Fix window title of screen shadow tab to correctly reflect the screen name.

5. Fix resolver drop-down selection when resolver is used multiple times

6. Fix extended desktop availability to be based on number of monitor in the screen.

7. Fix update of the Terminal Server Config tab and the Terminal Server Property tab.

8. Fix navigation in Terminal Configuration wizard for iPads when using synchronized ThinServers.

9. Fix display of display clients in the location node. Tree was sorting, so user selected order was not reflected in the tree.

ThinServer

1. Fix problem with Backup Firmware Package that was sometimes causing ThinServer to exit

2. Fix auto-create Terminal to copy the permissions of the Default terminal

Packages

1. Update to Share Keyboard/Mouse Master module, to support non-rectangle monitor layouts when using multimonitor thinclients (Package 6 and 7)

2. TermSecure / Relevance Users – fix to visible display clients after a user logs off. (Packages 6 and 7)

3. USB Touchscreen module – support for HID compatible devices (Package 7)

4. Intel Video driver module – support for more video output types

TermCap

1. Added Advantech UNO-3073G, TPC-1550-B, TPC-1750-B, TPC-2140

Initial Release

Component	Build
ThinManager	7000
ThinServer	7000
Package 7	7.0.2
Package 6	6.0.14
Package 5	5.0.5

1. New - Relevance - Location based thin clients. Relevance provides mobile environments the ability to deliver the right content to the right person at the right time and place.

2. New - 2012 Session Size Limits - Support of sessions up to 8192x8192. This greatly increases the layout possibilities for high resolution monitors.

3. New - Microsoft Ribbon Theme - Updated look and the ability to tear-off tabs and organize them to the users preference.

4. New - Mouse Locator Module - The Mouse Locator Module places a large cross-hair at the mouse location to make it easier to locate on large format displays.

ThinManager 6.0

Service Pack 4

Component	Build
ThinManager	6006
ThinServer	6010

ThinManager

1. Fix navigation for TermSecure user when adding a workstation display client

2. Change dialog title in terminal configuration wizard when not using display clients.

3. Fix status icon of modules in the terminal configuration wizard

ThinServer

1. Fix package 5 install

2. Upgrade standard packages (not custom packages) during service pack install

3. Make sure module name is displayed even if module does not exist in the selected package

4. Fix to TFTP implementation. Don’t send first packet before ACK received from terminal.

Package 6 (package version 6.0.11)

1. Firmware 6.0.16

2. Fix for Intel E100 network adapters

3. Better implementation of calibration activated by long touch

4. Fixes to terminal to terminal shadowing of WinTMC and iTMC clients

TermCap 6.0.15

1. Added Arecont cameras

2. Added Radeon support

3. Added additional Savage 4 support

4. Allow selection of COM ports 1-8 for touchscreens on a Generic PXE client

5. Added AP3400

Service Pack 3

Component	Build
ThinManager	6005
ThinServer	6009

New Feature

1. MultiStation: MultiStation offers the ability to have up to 5 independent users work on one client at the same time. Lower costs and increase your network efficiency by using MultiStation, the newest offering for the ThinManager Platform.

ThinManager

1. Enhanced Package Management (copy, rename, delete).

2. Enhanced module/firmware install by allowing package selection.

3. Package Backup/Restore.

4. Allow a package to be locked.

5. Enhanced tree view for MultiMonitor and MultiStation thin clients.

6. Ability to shadow an individual screen/station from ThinManager.

7. Ability to shadow an individual screen/station from a Terminal-to-Terminal shadow display client.

8. Better redrawing of UI during terminal shadow.

9. Setting to allow terminal replacement only with same model.

ThinServer

1. New permission setting for package creation/modification.

Package 6

1. Firmware was modified to support multi-station

TermCap

1. 1600×900 Video Mode for Unichrome.

Service Pack 2

Component	Build
ThinManager	6003
ThinServer	6006

ThinManager

1. Clear second mac from database when clearing terminal id

2. Fix detection of feature support by model

ThinServer

1. Fix to tftp thread startup/shutdown

2. Take into account second MAC when identifying hardware in DHCP server

3. Fixed registry entry default values

4. Added package validation to database integrity check

5. Fixed module parameters returned by stored procedure.

6. Fix to cleanup of entries in database when monitor connection lost

7. During replacement use PIC ids to determine if it is appropriate to set model back to Generic/PXE

Package 6.0.7

1. RDP SSL certificate fixes.

2. Fix date/time when using time zone redirection.

3. Windows Server 2008 drive redirection enhancements.

4. Fix mouse pointer when shadowing a multi-monitor thin client.

5. Retain DNS settings provided by ThinManager, instead of DNS settings from the DHCP server.

6. Support for EELY touch controller (USB).

7. Performance enhancements for sound redirection.

8. Quicker shadow initiation.

9. PC Prox Sonar module.

10. Fix to ICA module.

11. Support for IR Touch Series K touch controller.

12. Added support for COM5 and COM6 on Arista BoxPCx40

In order to access COM5 add the Add Serial Port Module to the terminal configuration and configure the module settings as follows:

SerialPort 5

Port 0x3e0

IRQ to 11

In order to access Com6 add the Add Serial Port Module to the terminal configuration and configure the module settings as follows:

SerialPort 6

Port 0x2e0

IRQ to 0

TermCap

1. Added support for Intel Clarkdale

2. Added support for Intel

3. Added support for Intel Arrandale

Service Pack 1

Component	Build
ThinManager	6002
ThinServer	6004

ThinManager

1. Delete workstation nodes before restoring configuration

ThinServer

1. Fix module installation on synced ThinServers

2. PXE server was not correctly stopped/started after restoring configuration

3. Fixed sync of packages that did not exist on both ThinServers

4. Restart tftp thread after restoring configuration when necessary.

5. Fix disable of terminal server when using DNS.

6. Changed queuing to better accommodate DeltaV users licensing requirements

7. Fixed installation of firmware from synchronized slave.

Firmware

1. Support for Hyper–V virtual thin clients

2. Support for Intel e1000 network adapter

3. Fixed Citrix published applications that have a space in the name

4. Eliminated multiple monitors connections to ThinServer

TermCap

1. Add 1600x900 Video Mode for Unichrome

2. Added supported for Hyper-V virtual client

3. Added Intel 965G video adapter

4. Added Intel Q35 video adapter

5. Added Intel 855GM video adapter

6. Added Intel 915G video adapter

7. Added Intel 965Q video adapter

Modules

1. ICA Client 12 – fixed config file generation

2. Use alternate address – fixed config file generation

3. Keyboard configuration – fixed support for international keyboards

4. Soundblaster sound – new

5. Shared keyboard mouse master – fixed under package 6 when using multimonitor

6. USB sound – added soundblaster support

Initial Release

Component	Build
ThinManager	6001
ThinServer	6001

New Features

1. Firmware Packages

2. Chain Loader for ThinManager Ready thin clients

3. Terminal Description Field

4. USB to VGA MultiMonitor Support

5. iTMC for the Apple iPad

6. Subscription Licensing

7. Web ThinManager Access

8. Block Mouse Button Functions

ThinManager 5.0

Service Pack 2

ThinManager

1. Clear the video pci id for PXE clients when clearing the terminal id

2. Fix display of camera overlay properties in configuration tab

3. Fix reservations for dual-ethernet thin clients

ThinServer

1. Fixed support for relay agents in the PXE server

2. Fixed handling of multiple ip ranges in PXE server

3. Fixed handling of abandoned events. Was locking up sync threads.

4. Fixed synchronization check for tables w/o primary keys (TerminalData)

5. Fixed problem with database callbacks when ThinManager has not been run

6. Changed the way session information is gathered for better compatibility with Windows 2008

Firmware

1. Fix for drop-down menu

TermCap

1. Add 1600x900 mode for AP-3200 and Generic PXE LX800 based on Dell P2011H monitor

2. Add Via VX900 support for PXE booting units

3. Added Intel N10 and Via CN896 for PXE booting units

4. Add Generic PXE support for Intel 965GME (8086:2a12)

5. Add 1600x900 mode for AP-3200 and Generic PXE LX800 based on Dell P2011H monitor

Modules

1. Touchcontrol – fix touch scaling for use w/ corevideo2 modules

2. Usbtouch – fix for IR Touch TouchScreens

3. Video2_chrome9 – added to support VIA VX 900 hw

4. Video2_intel3 – Fix to properly determine the model of the thin client

Service Pack 1

ThinManager

1. Fix problem with setting and storing custom URL for IP Cameras.

2. Fix terminal model information display in the terminal configuration wizard

3. Fix initial creation of VMWare server, that left an erroneous entry in the lock table. Prevented restoring of configuration, with an error about an object being locked.

4. Allowed periods (.) in the VM Ware server name (mostly for domains)

ThinServer

1. Fixed problem with terminal server monitor threads that was locking up synchronization

2. Fix flag that enables broadcast of “in demo mode” messages to terminals

3. Disable check for ip configuration conflicts during terminal boot, when the PXE Server is disabled.

4. Fixed problem that caused the DHCP Interfaces to be blank after restoring a configuration.

5. Added XLi to the promotional license.

Initial Release

New Features

1. PXE thin client support

2. XLi licensing

ThinManager 4.1

Service Pack 1

ThinManager

1. Better validation of workstation tree information to prevent ThinManager crash.

2. Stop requiring ip address for vcenter when using dns.

ThinServer

1. Fix termsecure “UseTerminal” settings

2. Fix tracking of time in sync thread that would cause synchronization to momentarily fail.

3. Fix buffer overrun in non-multicast tftp server that would cause ThinServer to crash

4. Fixed 4.0 upgrade routines

5. Fixed problem with mirrored license permissions

Initial Release

New Features

1. 64-bit version of ThinManager and ThinServer

2. Support for control and management of VMWare VCenter servers

ThinManager 4.0

Service Pack 4

ThinManager

1. Fixed prompt in synchronization setup

2. Fixed problem with creating tree in “show connected only” mode.

3. Fixed validation problem that would not allow the ip address to be entered for a ThinManager server when DNS is enabled.

ThinServer

1. Fixed some log messages.

2. Changed time stamping to alleviate problems with changing the server time.

3. Fixed removal of synchronization threads that are no longer needed.

4. Fixed problem with “Main Monitor” setting when set to “At Mouse”

5. Improved database integrity when switch between multi-monitor and single-monitor modes.

Firmware

1. Improved image decoding for IP cameras to allow support of more types of ip cameras

Termcap

1. Added support for Advantech 1150G

2. Added support for Advantech 2053GL

3. Added support for Advantech ARK-Advantech ARK-3202

4. Added support for Nematron nPC100

5. Added support for Nematron ePC1900

6. Added support for Nematron ePC1700

7. Added support for Nematron ePC1500

8. Added support for Nematron ePC1200

9. Added support for BoxPC238D

Modules

1. Sound module for Advantech 1150G

2. Sound module for Advantech 2053GL

3. Sound module for Advantech 3202

4. Sound module for Arista BoxPC238D

5. Sound module for Nematron Models

6. Video2_intel4 Module – added to support Nematron hardware

7. Universal sound module architecture.

Service Pack 3

ThinManager

1. Update release date only

ThinServer

1. Fixed problem with loading master license, that caused ThinServer to terminate on some systems.

Firmware

1. 2008 Server RDP device license fix

2. Camera overlay start up fixes

3. Fix to identification of the second ethernet port on UNO-2173

Termcap

1. Added support for AP-3300

Modules

1. Added AP-3300 sound module

2. Added pcProxUSB module to support keyboard wedge version of the pcProx USB HID scanner

3. Change to ICA client version 8 module. Removed specific of the UDP for browser protocol

4. Added support for new Elographics controller to the USBTouch module

Service Pack 2

ThinManager

1. Fix Display Client icon on multimonitor configuration. Did not reflect presence of overrides.

2. Fix WinTMC options “Always maintain monitor connection” and “Show groups as separate windows”. Check box did not reflect group inheritance setting.

3. Fix Display client icon after re-ordering of Display Clients. Icon would disappear after re-ordering.

4. Fixed initial icons for Terminal Servers when ThinManager started. Icon did not reflect the lock or enable/disable state of the Terminal Server.

5. Added ability to re-arrange monitors in multi-monitor configurations.

ThinServer

1. Change way user SIDs are gathered and cached.

2. Fixed application of camera options. Camera options are only applied if selected.

3. Fix enable/disable of Terminal server on synchronized systems.

4. Fix to CRC generation routines. Some demo codes would not be recognized as valid.

5. Fix Synchronization problem with respect to encryption that causes synchronization to fail and re-sync.

6. Fixed SmartSession data collection. Prevented collection of load balancing data under some circumstances.

Firmware

1. Support for Dual Monitor with one graphics adapter

2. Stop listening on Port 6000

3. 32bpp support for UNO-2173 and ARK-1382

4. Allow initial program of longer than 128 characters

Modules

1. Redundant Ethernet Module – Warning messages if backup adapter is disconnected

TermCap

1. Fix default resolution for the Axis M1011 camera.

2. Added Advantech UNO-2173

3. Added Advantech ARK-1382

Service Pack 1

ThinManager

1. Fix problem with Camera Option settings. Camera options could not be set in some cases.

2. Fix “Copy settings from another terminal” option in the Terminal Configuration Wizard. Only copy the model from the source configuration when the target configuration is not associated with a piece of hardware.

3. Fix support for some 4 monitor layouts.

4. Allow setting of the application group hotkey at appropriate times.

5. Made the “Browse” button available at appropriate times in the Report generation dialog

ThinServer

1. Fix support for non-redundant licensing on synchronized systems.

2. Fix for duplicate license detection on synchronized systems.

3. Removed enforcement of the terminal to terminal shadow license.

TermCap

1. Added 1600x900 video mode for WinTMC

ThinManager 3.3

Service Pack 2

ThinManager / ThinServer

1. Fix problem with manual synchronization.

2. Fix problem with main menu hotkey and application group hotkey enable / disable

3. Make sure “Browse” button in Report Scheduling is only available at appropriate times.

4. Allow specification of non-existing files as the report target

5. Added display of multimonitor configuration in the details pane of the terminal.

Service Pack 1

ThinManager / ThinServer

1. Removed install ids for motherboards whose manufacturer did not provide unique serial numbers.

2. Fix problem with initial program / command line options

3. Performance improvement to resetting terminal server sessions when TermSecure user logs off

4. Fix permission problem that prevented some commands from being sent to the terminal

5. Fixed problem with updating some Application Group icons

6. Added display of multimonitor configuration in the details pane of the terminal.

Firmware

7. Savage video module now ignores EDID

8. Fixed touchscreen modules for use with multimonitor.

9. Fixed keyboard mapping for the backslash (‘\’) key on non-standard keyboards

10. Fixed memory leak in sliding windows