ThinManager Database Tool

The ThinManager Database Tool is a utility that allows the end user to modify certain values in the configuration database from a command line instead of through the ThinManager interface.

Usage

Examples

TMDBT --terminal-restart Paint1	Connects to the local ThinServer and restarts the terminal that's not in a group named Paint1.
TMDBT --server 10.50.10.20 Administrator Password --terminal-restart Paint1	Same as the above example except the program will connect to the ThinServer at 10.50.10.20 using the specified credentials.
TMDBT --file commands.csv	Parses the file commands.csv for any number of commands.
TMDBT --terminal-setwindowscredentials Paint1 User1 Password --terminal-restart Paint1	Sets the credentials for terminal Paint1 to User1 Password and then restarts it.

Behavior Notes

Credentials

Wherever new credentials are specified there as three different defined behaviors.

UserName	Sets the username and leaves the domain field unchanged.
Domain\UserName	Sets the username and domain.
.\UserName	Sets the username and removes the domain.

Names and Group Names

When specifying a Terminal name or a Location name the whole path including groups must be specified.

Terminal1	Refers to an terminal named Terminal1 that is not a part of any group.
Painting\Paint1	Refers to a terminal named Paint1 in the Painting group.
BaseLocation\Room302\PaintBooth	Refers to the PaintBooth location that is in the Room302 group that is in the BaseLocation group.

Display Client names, Terminal Server names, and TermSecure User names are all unique; Only the name is specified.

Commands

Program Behavior

Output

By default only errors will be printed to the command prompt. Using one of the below settings will modify this behavior. This argument must be listed first or it will be ignored.

--quiet	Suppresses all messages.
--verbose	Outputs information from all commands as well as errors.

Connection

Omitting this parameter will cause the program to connect to the local ThinServer. This argument must be listed first or only be preceded by --quiet / --verbose or it will be ignored.

--server IPAddress User Password

Connects to the server specified by IPAddress using the UserName/Password specified.

CSV File

Comma delimited CVS file(s) can be specified to make passing commands easier. Any number of files can be specified and intermixed with command-line arguments.

--file FileName

Specifies a CSV file to parse for commands. The file must be in the same directory as this program or the full file path must be specified.

Global

--restartall WaitTime	Restarts all online terminals waiting the specified WaitTime in milliseconds between each.
--rebootall WaitTime	Reboots all online terminals waiting the specified WaitTime in milliseconds between each.
--calibratealltouchscreens	Initiates the touchscreen calibration on all online terminals.
--replaceallwindowscredentials OldUser NewUser NewPassword	Replaces all instances of OldUserName with NewUser and NewPassword.

Terminal

--terminal-restart TerminalName	Restarts the terminal with the name TerminalName.
--terminal-reboot TerminalName	Reboots the terminal with the name TerminalName.
--terminal-poweroff TerminalName	Turns off the terminal with the name TerminalName.
--terminal-disable TerminalName	Disables the terminal with the name TerminalName.
--terminal-enable TerminalName	Enables the terminal with the name TerminalName.
--terminal-calibratetouchscreens TerminalName	Calibrates all touchscreens connected to the terminal with the name TerminalName.
--terminal-calibratetouchscreen TerminalName ScreenNumber	Calibrates all touchscreens connected to screen ScreenNumber on the terminal with the name TerminalName.
--terminal-replacewindowscredentials OldUser NewUser NewPassword	Replaces all instances of OldUser with NewUser and NewPassword for all terminals.
--terminal-setwindowscredentials TerminalName NewUser NewPassword	Sets the credentials for the specified TerminalName to NewUser and NewPassword.

Display Client

--displayclient-replacewindowscredentials OldUser NewUser NewPassword	Replaces all instances of OldUser with NewUser and NewPassword for all display clients.
--displayclient-setwindowscredentials TerminalName DisplayClientName NewUser NewPassword	Sets the credentials for the specified DisplayClientName under TerminalName to NewUser and NewPassword.

Terminal Server

--terminalserver-disable ServerName	Disables the terminal server with the name ServerName.
--terminalserver-enable ServerName	Enables the terminal server with the name ServerName.
--terminalserver-replacewindowscredentials OldUser NewUser NewPassword	Replaces all instances of OldUser with NewUser and NewPassword for all terminal servers.
--terminalserver-setwindowscredentials TerminalServerName NewUser NewPassword	Sets the credentials for the specified TerminalServerName to NewUser and NewPassword.

TermSecure

--termsecure-setcardnumber Username CardNumber	Sets the card id to CardNumber for the specified TermSecure user username.
--termsecure-setcardnumberbywindowsuser WindowsUsername CardNumber	Sets the card id to CardNumber for a TermSecure user using a unique Windows username WindowsUsername.
--termsecure-replacewindowscredentials OldUser NewUser NewPassword	Replaces all instances of OldUser with NewUser and NewPassword for all TermSecure users.
--termsecure-setwindowscredentials TermSecureUser NewUser NewPassword	Sets the credentials for the specified TermSecureUser to NewUser and NewPassword.

Relevance Location

--location-replacewindowscredentials OldUser NewUser NewPassword	Replaces all instances of OldUser with NewUser and NewPassword for all locations.
--location-setwindowscredentials LocationName NewUser NewPassword	Sets the credentials for the specified LocationName to NewUser and NewPassword.