Welcome to the ThinManager Knowledgebase.
Additional knowledgebase articles can be found at Rockwell Automation Tech Support.

If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201.

ATMC

From ThinManager Knowledge Base
Revision as of 14:09, 2 June 2017 by Randycannady (talk | contribs)
Jump to: navigation, search

System Requirements

For versions up to 1.0.6

  • Android 4.0+.
  • Android 4.4+ to support Bluetooth beacons.
  • ThinManager 7+ with XLi License.

For versions 1.1.0 and newer

  • Android 5.0+

System Recommendations

  • Non-fixed focus rear camera to support barcode/qrcode scanning
  • Bluetooth 4.0 (low energy) to support Bluetooth beacons
  • Quad-core processor
  • 5GHz wireless networking.
  • GPS for using GPS Relevance resolvers.

Setup and Configuration Overview

  • Download and install the aTMC application from the Google Play store.
  • Configure the Tablet as a client in ThinManager.
  • Open the aTMC application and define the ThinManager Server you will connect to.
  • Connect to the listed ThinManager Server.
  • Select the pre-configured terminal from the list of offline terminals, or select the Create New Terminal option
  • The aTMC client will connect and run.

Setting up ThinManager

ThinManager requires a new Terminal to be setup so the Tablet can receive its configuration from the ThinManager Server. This can be accomplished by:

  • From ThinManager, click Edit > Add Terminal
  • Make/OEM: Generic; Model: Android Device
  • Proceed through the wizard and assign display clients to the Android Terminal.
  • Finish out the Wizard when all desired options have been selected.

Gestures

1-Finger-Tap.png Left Click -- A tap will perform a left click.
1-Finger-Hold.png Right Click -- A long-press will perform a right click.
1-Finger-Pan.png Left Click and Drag -- A pan will perform a left click and drag.
2-Finger-Hold.png Toggle Keyboard -- A 2 finger long press will hide or unhide the keyboard.
2-Finger-Pinch.png Zoom Session -- A 2 finger punch will zoom and unzoom.
2-Finger-Pan.png Pan Session -- A 2 finger pan will allow you to pan while zoomed in.
3-Finger-Hold.png Toggle Menu Bar -- A 3 finger long press will hide or unhide the top menu bar.
3-Finger-Swipe-Left.png Next Display Client -- A 3 finger swipe to the left will move you to the next display client.
3-Finger-Swipe.png Previous Display Client -- A 3 finger swipe to the right will move you to the previous display client.