|
If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201. |
ITMC
Redirect to:
The iTMC iPad Client is used by either by an iPad or iPhone for use as a terminal with ThinManager.
Contents
System Requirements
- iOS 5.1+.
- All iPads, iPhone 3GS+, iPod Touch 3rd Generation+
- ThinManager 6 with XLi License.
Setup and Configuration Overview
- Download and install the iTMC application from the Apple App Store.
- Configure the iPad as a client in ThinManager.
- Open the iTMC application and define the ThinManager Server you will connect to.
- Connect to the listed ThinManager Server.
- Select the pre-configured terminal from the list of offline terminals, or select the Create New Terminal option
- The iTMC client will connect and run.
Setting up ThinManager
ThinManager requires a new Terminal to be setup so the iPad can receive its configuration from the ThinManager Server. This can be accomplished by:
- From ThinManager, click Edit > Add Terminal
- Make/OEM: Apple; Model: iPad
- Proceed through the wizard and assign display clients to the iPad Terminal.
- Finish out the Wizard when all desired options have been selected.
Setting up iTMC
Once iTMC is downloaded and installed on your compatible iOS device, iTMC will need to be configured to point to the correct ThinManager Server.
- Select the plus sign in the upper right corner of the iTMC client to the open the New Configuration window.
- Specify a Configuration Description and a Primary ThinServer IP and save your configuration.
- A Secondary ThinServer IP may be entered to provide redundancy.
- Tap the newly created configuration and then tap Connect.
- Select the iPad terminal created in the previous section.
