In an effort to create a more unified support experience, we have moved support of our Knowledgebase to Rockwell Automation Tech Support.

If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201.

Changelogs

From ThinManager Knowledge Base
Revision as of 14:32, 6 December 2012 by Anonymous (talk) (Package 6.0.7)
Jump to: navigation, search

These are the internal changelogs for ThinManager. Information here is may be fit for general consumption, but foresight should be used when disclosing this article's contents to customers and integrators. Information that is listed on the Evolution page is considered to be fit for general consumption.
Bminow (talk) 19:59, 10 November 2012 (CST)


ThinManager 3.3

Service Pack 1

ThinManager / ThinServer

1. Removed install ids for motherboards whose manufacturer did not provide unique serial numbers.
2. Fix problem with initial program / command line options
3. Performance improvement to resetting terminal server sessions when TermSecure user logs off
4. Fix permission problem that prevented some commands from being sent to the terminal
5. Fixed problem with updating some Application Group icons
6. Added display of multimonitor configuration in the details pane of the terminal.

Firmware

7. Savage video module now ignores EDID
8. Fixed touchscreen modules for use with multimonitor.
9. Fixed keyboard mapping for the backslash (‘\’) key on non-standard keyboards
10. Fixed memory leak in sliding windows

Service Pack 2

ThinManager / ThinServer

1. Fix problem with manual synchronization.
2. Fix problem with main menu hotkey and application group hotkey enable / disable
3. Make sure “Browse” button in Report Scheduling is only available at appropriate times.
4. Allow specification of non-existing files as the report target
5. Added display of multimonitor configuration in the details pane of the terminal.

ThinManager 4.0

Service Pack 1

ThinManager

1. Fix problem with Camera Option settings. Camera options could not be set in some cases.
2. Fix “Copy settings from another terminal” option in the Terminal Configuration Wizard. Only copy the model from the source configuration when the target configuration is not associated with a piece of hardware.
3. Fix support for some 4 monitor layouts.
4. Allow setting of the application group hotkey at appropriate times.
5. Made the “Browse” button available at appropriate times in the Report generation dialog

ThinServer

1. Fix support for non-redundant licensing on synchronized systems.
2. Fix for duplicate license detection on synchronized systems.
3. Removed enforcement of the terminal to terminal shadow license.

TermCap

1. Added 1600x900 video mode for WinTMC

Service Pack 2

ThinManager

1. Fix Display Client icon on multimonitor configuration. Did not reflect presence of overrides.
2. Fix WinTMC options “Always maintain monitor connection” and “Show groups as separate windows”. Check box did not reflect group inheritance setting.
3. Fix Display client icon after re-ordering of Display Clients. Icon would disappear after re-ordering.
4. Fixed initial icons for Terminal Servers when ThinManager started. Icon did not reflect the lock or enable/disable state of the Terminal Server.
5. Added ability to re-arrange monitors in multi-monitor configurations.

ThinServer

1. Change way user SIDs are gathered and cached.
2. Fixed application of camera options. Camera options are only applied if selected.
3. Fix enable/disable of Terminal server on synchronized systems.
4. Fix to CRC generation routines. Some demo codes would not be recognized as valid.
5. Fix Synchronization problem with respect to encryption that causes synchronization to fail and re-sync.
6. Fixed SmartSession data collection. Prevented collection of load balancing data under some circumstances.

Firmware

1. Support for Dual Monitor with one graphics adapter
2. Stop listening on Port 6000
3. 32bpp support for UNO-2173 and ARK-1382
4. Allow initial program of longer than 128 characters

Modules

1. Redundant Ethernet Module – Warning messages if backup adapter is disconnected

TermCap

1. Fix default resolution for the Axis M1011 camera.
2. Added Advantech UNO-2173
3. Added Advantech ARK-1382

Service Pack 3

ThinManager

1. Update release date only

ThinServer

1. Fixed problem with loading master license, that caused ThinServer to terminate on some systems.

Firmware

1. 2008 Server RDP device license fix
2. Camera overlay start up fixes
3. Fix to identification of the second ethernet port on UNO-2173

Termcap

1. Added support for AP-3300

Modules

1. Added AP-3300 sound module
2. Added pcProxUSB module to support keyboard wedge version of the pcProx USB HID scanner
3. Change to ICA client version 8 module. Removed specific of the UDP for browser protocol
4. Added support for new Elographics controller to the USBTouch module

Service Pack 4

ThinManager

1. Fixed prompt in synchronization setup
2. Fixed problem with creating tree in “show connected only” mode.
3. Fixed validation problem that would not allow the ip address to be entered for a ThinManager server when DNS is enabled.

ThinServer

1. Fixed some log messages.
2. Changed time stamping to alleviate problems with changing the server time.
3. Fixed removal of synchronization threads that are no longer needed.
4. Fixed problem with “Main Monitor” setting when set to “At Mouse”
5. Improved database integrity when switch between multi-monitor and single-monitor modes.

Firmware

1. Improved image decoding for IP cameras to allow support of more types of ip cameras

Termcap

1. Added support for Advantech 1150G
2. Added support for Advantech 2053GL
3. Added support for Advantech ARK-Advantech ARK-3202
4. Added support for Nematron nPC100
5. Added support for Nematron ePC1900
6. Added support for Nematron ePC1700
7. Added support for Nematron ePC1500
8. Added support for Nematron ePC1200
9. Added support for BoxPC238D

Modules

1. Sound module for Advantech 1150G
2. Sound module for Advantech 2053GL
3. Sound module for Advantech 3202
4. Sound module for Arista BoxPC238D
5. Sound module for Nematron Models
6. Video2_intel4 Module – added to support Nematron hardware
7. Universal sound module architecture.

ThinManager 4.1

Initial Release

New Features

1. 64-bit version of ThinManager and ThinServer
2. Support for control and management of VMWare VCenter servers

Service Pack 1

ThinManager

1. Better validation of workstation tree information to prevent ThinManager crash.
2. Stop requiring ip address for vcenter when using dns.

ThinServer

1. Fix termsecure “UseTerminal” settings
2. Fix tracking of time in sync thread that would cause synchronization to momentarily fail.
3. Fix buffer overrun in non-multicast tftp server that would cause ThinServer to crash
4. Fixed 4.0 upgrade routines
5. Fixed problem with mirrored license permissions

ThinManager 5.0

Initial Release

New Features

1. PXE thin client support
2. XLi licensing

Service Pack 1

ThinManager

1. Fix problem with setting and storing custom URL for IP Cameras.
2. Fix terminal model information display in the terminal configuration wizard
3. Fix initial creation of VMWare server, that left an erroneous entry in the lock table. Prevented restoring of configuration, with an error about an object being locked.
4. Allowed periods (.) in the VM Ware server name (mostly for domains)

ThinServer

1. Fixed problem with terminal server monitor threads that was locking up synchronization
2. Fix flag that enables broadcast of “in demo mode” messages to terminals
3. Disable check for ip configuration conflicts during terminal boot, when the PXE Server is disabled.
4. Fixed problem that caused the DHCP Interfaces to be blank after restoring a configuration.
5. Added XLi to the promotional license.

Service Pack 2

ThinManager

1. Clear the video pci id for PXE clients when clearing the terminal id
2. Fix display of camera overlay properties in configuration tab
3. Fix reservations for dual-ethernet thin clients

ThinServer

1. Fixed support for relay agents in the PXE server
2. Fixed handling of multiple ip ranges in PXE server
3. Fixed handling of abandoned events. Was locking up sync threads.
4. Fixed synchronization check for tables w/o primary keys (TerminalData)
5. Fixed problem with database callbacks when ThinManager has not been run
6. Changed the way session information is gathered for better compatibility with Windows 2008

Firmware

1. Fix for drop-down menu

TermCap

1. Add 1600x900 mode for AP-3200 and Generic PXE LX800 based on Dell P2011H monitor
2. Add Via VX900 support for PXE booting units
3. Added Intel N10 and Via CN896 for PXE booting units
4. Add Generic PXE support for Intel 965GME (8086:2a12)
5. Add 1600x900 mode for AP-3200 and Generic PXE LX800 based on Dell P2011H monitor

Modules

1. Touchcontrol – fix touch scaling for use w/ corevideo2 modules
2. Usbtouch – fix for IR Touch TouchScreens
3. Video2_chrome9 – added to support VIA VX 900 hw
4. Video2_intel3 – Fix to properly determine the model of the thin client

ThinManager 6.0

Initial Release

New Features

1. Firmware Packages
2. Chain Loader for ThinManager Ready thin clients
3. Terminal Description Field
4. USB to VGA MultiMonitor Support
5. iTMC for the Apple iPad
6. Subscription Licensing
7. Web ThinManager Access
8. Block Mouse Button Functions

Service Pack 1

ThinManager

1. Delete workstation nodes before restoring configuration

ThinServer

1. Fix module installation on synced ThinServers
2. PXE server was not correctly stopped/started after restoring configuration
3. Fixed sync of packages that did not exist on both ThinServers
4. Restart tftp thread after restoring configuration when necessary.
5. Fix disable of terminal server when using DNS.
6. Changed queuing to better accommodate DeltaV users licensing requirements
7. Fixed installation of firmware from synchronized slave.

Firmware

1. Support for Hyper–V virtual thin clients
2. Support for Intel e1000 network adapter
3. Fixed Citrix published applications that have a space in the name
4. Eliminated multiple monitors connections to ThinServer

TermCap

1. Add 1600x900 Video Mode for Unichrome
2. Added supported for Hyper-V virtual client
3. Added Intel 965G video adapter
4. Added Intel Q35 video adapter
5. Added Intel 855GM video adapter
6. Added Intel 915G video adapter
7. Added Intel 965Q video adapter

Modules

1. ICA Client 12 – fixed config file generation
2. Use alternate address – fixed config file generation
3. Keyboard configuration – fixed support for international keyboards
4. Soundblaster sound – new
5. Shared keyboard mouse master – fixed under package 6 when using multimonitor
6. USB sound – added soundblaster support

Service Pack 2

ThinManager

1. Clear second mac from database when clearing terminal id
2. Fix detection of feature support by model

ThinServer

1. Fix to tftp thread startup/shutdown
2. Take into account second MAC when identifying hardware in DHCP server
3. Fixed registry entry default values
4. Added package validation to database integrity check
5. Fixed module parameters returned by stored procedure.
6. Fix to cleanup of entries in database when monitor connection lost
7. During replacement use PIC ids to determine if it is appropriate to set model back to Generic/PXE

Package 6.0.7

Added support for COM5 and COM6 on Arista BoxPCx40

In order to access COM5 add the Add Serial Port Module to the terminal configuration and configure the module settings as follows:
  • SerialPort 5
  • Port 0x3e0
  • IRQ to 11

In order to access Com6 add the Add Serial Port Module to the terminal configuration and configure the module settings as follows:
  • SerialPort 6
  • Port 0x2e0
  • IRQ to 0
Arista BoxPCx40 COM BIOS Settings
COM Address IRQ Notes
1 0x3f8 4
2 0x2f8 3
3 0x3e8 5
4 0x2e8 7
5 0x3e0 11
6 0x2e0 11 Limited to 9600 baud