Welcome to the ThinManager Knowledgebase.
Additional knowledgebase articles can be found at Rockwell Automation Tech Support.

If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201.

Difference between revisions of "Ports"

From ThinManager Knowledge Base
Jump to: navigation, search
(ICMP)
(TCP 5900)
Line 27: Line 27:
  
 
==TCP 5900==
 
==TCP 5900==
Shadowing -- Used to shadow terminals. This can be changed on the Shadow Configuration page of the ThinManager Server Configuration Wizard.
+
Shadowing -- Used to shadow terminals. This can be changed on the Shadow Configuration page of the ThinManager Server Configuration Wizard.<br>
 +
This port is configurable by:
 +
*Double click you server name to bring up the ThinManager Server Configuration Wizard
 +
*Selecting Next until you come to the Shadow Configuration page.
  
 
==ICMP==
 
==ICMP==
 
Ping -- Used by WinTMC and Enforce Primary.
 
Ping -- Used by WinTMC and Enforce Primary.

Revision as of 15:30, 13 November 2012


UDP 67

IP Address Assignment -- Used by the PXE Server (if using PXE boot) (ThinManager 5.0 and later).

UDP 69

TFTP -- Used by PXE Server (if using PXE boot) to pull firmware (ThinManager 5.0 and later).

TCP 1494

Citrix -- Used by the ICA protocol (if using ICA instead of RDP).

UDP 1758

MultiCast -- Used if MultiCasting is enabled in ThinManager.

TCP 2031

Configuration -- Used to pass the configuration from the ThinManager Server to the thin client.

TCP 2032

ThinServer Proxy Service -- used by ThinManager Mobile iPad and iPhone Apps.

TCP 3389

RDP -- Used by the RDP protocol (if using ThinManager v2.4.1 or later).

UDP 4900

TFTP -- Used for the TFTP download of the firmware.

TCP 5900

Shadowing -- Used to shadow terminals. This can be changed on the Shadow Configuration page of the ThinManager Server Configuration Wizard.
This port is configurable by:

  • Double click you server name to bring up the ThinManager Server Configuration Wizard
  • Selecting Next until you come to the Shadow Configuration page.

ICMP

Ping -- Used by WinTMC and Enforce Primary.