Welcome to the ThinManager Knowledgebase.
Additional knowledgebase articles can be found at Rockwell Automation Tech Support.

If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201.

Difference between revisions of "Synchronization"

From ThinManager Knowledge Base
Jump to: navigation, search
(Manual Synchronization)
 
Line 9: Line 9:
 
**Select Manage > Backup Configuration from the ThinManager menu bar to backup the configuration.
 
**Select Manage > Backup Configuration from the ThinManager menu bar to backup the configuration.
 
*ThinManager has a scheduling function that can be set to automatically back up the configuration.  
 
*ThinManager has a scheduling function that can be set to automatically back up the configuration.  
*Automatic synchronization is required for Mirrored Redundancy.
+
*Automatic synchronization is required for Mirrored [[Redundancy]].
 
*Automatic synchronization will configure each thin client to send the green/red status lights to both ThinManager Servers so the ThinManager Server Monitor List page isn't shown in the Terminal Configuration Wizard, as it isn’t needed.  
 
*Automatic synchronization will configure each thin client to send the green/red status lights to both ThinManager Servers so the ThinManager Server Monitor List page isn't shown in the Terminal Configuration Wizard, as it isn’t needed.  
 
----
 
----
Line 35: Line 35:
 
Select '''Manage > Synchronize Configurations''' from the menu to initiate the Manual Synchronization. This
 
Select '''Manage > Synchronize Configurations''' from the menu to initiate the Manual Synchronization. This
 
will launch the Synchronize ThinManager Server Configurations Wizard.
 
will launch the Synchronize ThinManager Server Configurations Wizard.
<center>[[File:Sync6.png|Synchronize ThinManager Server Configuration Wizard]]<br>''Synchronize ThinManager Server Configuration Wizard''<br></center>
+
<center>[[File:Sync6.png|Synchronize ThinManager Server Configuration Wizard]]<br>''Synchronize [[ThinManager Server Configuration]] Wizard''<br></center>
 
Highlight the primary ThinManager Server as the Configuration Source ThinManager Server and the secondary ThinManager Server as the Configuration Destination. Select Next to proceed. Although many ThinManager Servers can be defined in the ThinManager Server List it is normal to have just a primary and a backup ThinManager Server.
 
Highlight the primary ThinManager Server as the Configuration Source ThinManager Server and the secondary ThinManager Server as the Configuration Destination. Select Next to proceed. Although many ThinManager Servers can be defined in the ThinManager Server List it is normal to have just a primary and a backup ThinManager Server.
 
<center>[[File:Sync7.png|Synchronization Differences]]<br>''Synchronization Differences''<br></center>
 
<center>[[File:Sync7.png|Synchronization Differences]]<br>''Synchronization Differences''<br></center>
Line 44: Line 44:
 
Select Next to continue.
 
Select Next to continue.
 
<center>[[File:Sync8.png|ThinManager Server Synchronization Confirmation]]<br>''ThinManager Server Synchronization Confirmation''<br></center>
 
<center>[[File:Sync8.png|ThinManager Server Synchronization Confirmation]]<br>''ThinManager Server Synchronization Confirmation''<br></center>
The ThinManager Server Configuration Wizard will prompt for a confirmation of the synchronization before proceeding. Select Finish to finalize the synchronization.
+
The [[ThinManager Server Configuration]] Wizard will prompt for a confirmation of the synchronization before proceeding. Select Finish to finalize the synchronization.
 
<center>[[File:Sync9.png|Synchronization Progress Meter]]<br>''Synchronization Progress Meter''<br></center>
 
<center>[[File:Sync9.png|Synchronization Progress Meter]]<br>''Synchronization Progress Meter''<br></center>
 
ThinManager will display the progress of the synchronization as it updates the files.<br>
 
ThinManager will display the progress of the synchronization as it updates the files.<br>
 
A message will display the final results of the synchronization.
 
A message will display the final results of the synchronization.

Latest revision as of 18:30, 14 November 2012

Multiple ThinManager Servers should be synchronized so that a terminal will receive the same configuration regardless of the ThinManager Server that it boots from. ThinManager supports two different methods of synchronization: Manual and Automatic, both of which will be covered in this article.

Automatic Synchronization

Automatic synchronization makes it easier to keep the configuration on the two ThinManager Servers the same. Changing a configuration on one will make the change on the other.
Automatic Synchronization has a few things to consider:

  • It is a good idea to backup the configuration before making changes because a mistake on one ThinManager Server will pass the mistake to the other ThinManager Server. The backup will allow a chance to restore the configuration to a known good state.
    • Select Manage > Backup Configuration from the ThinManager menu bar to backup the configuration.
  • ThinManager has a scheduling function that can be set to automatically back up the configuration.
  • Automatic synchronization is required for Mirrored Redundancy.
  • Automatic synchronization will configure each thin client to send the green/red status lights to both ThinManager Servers so the ThinManager Server Monitor List page isn't shown in the Terminal Configuration Wizard, as it isn’t needed.

Note: Automatic synchronization is required for Mirrored licenses, Redundant licenses, and Enterprise Server licenses


Automatic synchronization is configured in the ThinManager Server List Wizard. Launch it by selecting Manage > ThinManager Server List ThinManager menu.
Proceed the Auto-synchronization Selection page.

Auto-synchronization Selection Page
Auto-synchronization Selection Page

Select the Automatic Synchronization checkbox and select the Next button to configure Auto-synchronization.

Automatic Synchronization Configuration

Auto-synchronization Configuration
Auto-synchronization Configuration

Select each Edit button on the Auto-synchronization Configuration page to launch the Enter ThinManager Server Information Window for each ThinManager Server.

Enter ThinManager Server Information Window
Enter ThinManager Server Information Window
  • Enter the name of the ThinManager Server in the ThinManager Server field.
  • Enter the IP address of the ThinManager Server. The Discover button will enter the IP address for you.
  • Select the OK button to accept the settings or the Cancel button to close without saving.
Synchronized Pair of ThinManager Servers
Synchronized Pair of ThinManager Servers

Select Finish to accept the changes and close the ThinManager Server List wizard. The two ThinManagers will now be synchronized.

Synchronization Tab
Synchronization Tab

The synchronization status can be checked on the Synchronization tab of ThinManager.

Manual Synchronization

Redundant ThinManager Servers should be synchronized so that the same configuration is available to ThinManager Ready thin clients regardless of where they boot. Automatic Synchronization is the preferred method but the ThinManager Servers can be manually synchronized.
Select Manage > Synchronize Configurations from the menu to initiate the Manual Synchronization. This will launch the Synchronize ThinManager Server Configurations Wizard.

Synchronize ThinManager Server Configuration Wizard
Synchronize ThinManager Server Configuration Wizard

Highlight the primary ThinManager Server as the Configuration Source ThinManager Server and the secondary ThinManager Server as the Configuration Destination. Select Next to proceed. Although many ThinManager Servers can be defined in the ThinManager Server List it is normal to have just a primary and a backup ThinManager Server.

Synchronization Differences
Synchronization Differences

The ThinManager Synchronization Wizard will list the files being updated, including the firmware, TermCap database, modules, and the configuration. It synchronizes everything but the licenses.


Note: The Synchronization tool does not compare and contrast then make changes back and forth. Synchronization will take the files and configuration from the source ThinManager Server and overwrite the corresponding files on the destination ThinManager Server.


Select Next to continue.

ThinManager Server Synchronization Confirmation
ThinManager Server Synchronization Confirmation

The ThinManager Server Configuration Wizard will prompt for a confirmation of the synchronization before proceeding. Select Finish to finalize the synchronization.

Synchronization Progress Meter
Synchronization Progress Meter

ThinManager will display the progress of the synchronization as it updates the files.
A message will display the final results of the synchronization.