|
If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201. |
Difference between revisions of "Category:Installation"
(Created page with "Articles in this category pertain to the installation of ThinManager.") |
|||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | + | Everything you need to do to get ThinManager up and running, in 400 words or less. | |
| + | ==Microsoft== | ||
| + | *Build a terminal server with the Microsoft Windows 2003,2008,[[2008R2]],2012,2012R2,2016 Server operating system. | ||
| + | *Create a Microsoft Licensing Server and add a Terminal Server Client Access License, or TS CAL, for each thin client. These are called RDS CALs (Remote Desktop Services CALs) in Server 2008. | ||
| + | The servers also require a normal CAL. | ||
| + | *Create a Microsoft user profile for each terminal on the terminal server. Make sure that the user is a member of the Remote Desktop Users Windows group. | ||
| + | *Apply appropriate security to each user profile using the standard Microsoft techniques. | ||
| + | ==ThinManager== | ||
| + | *Install ACP ThinManager software onto a computer to create a ThinManager Server. | ||
| + | *Create a Master ACP License and add enough Product [[Licenses]] for each ThinManager Ready thin client. | ||
| + | ==Hardware== | ||
| + | *Establish the IP addressing scheme for the thin clients. ThinManager Ready thin clients can use Static IP or DHCP. ThinManager Compatible thin clients need to use PXE boot. | ||
| + | *If using Static, open the IP Address menu on the thin client and list the IP address of the thin client and the ThinManager Server. | ||
| + | *If using DHCP, configure Option 066 to list the IP address of the ThinManager Server. | ||
| + | *If using PXE Boot, enable PXE boot by selecting Manage>PXE Server to launch the PXE Server wizard. | ||
| + | *Attach the terminals to ThinManager by either: | ||
| + | *Turning on the terminal and selecting the "Create New Terminal" option when the offline terminals are listed. | ||
| + | *Pre-creating the terminals in ThinManager and selecting the proper terminal name when the terminal is turned on and offline terminals are listed. | ||
| + | ==Results== | ||
| + | *Step 1: The clients will connect to the ThinManager Server and download the firmware and configuration. | ||
| + | *Step 2: The configuration will send them to the terminal server to login and start a session. | ||
Latest revision as of 13:50, 6 June 2017
Everything you need to do to get ThinManager up and running, in 400 words or less.
Contents
Microsoft
- Build a terminal server with the Microsoft Windows 2003,2008,2008R2,2012,2012R2,2016 Server operating system.
- Create a Microsoft Licensing Server and add a Terminal Server Client Access License, or TS CAL, for each thin client. These are called RDS CALs (Remote Desktop Services CALs) in Server 2008.
The servers also require a normal CAL.
- Create a Microsoft user profile for each terminal on the terminal server. Make sure that the user is a member of the Remote Desktop Users Windows group.
- Apply appropriate security to each user profile using the standard Microsoft techniques.
ThinManager
- Install ACP ThinManager software onto a computer to create a ThinManager Server.
- Create a Master ACP License and add enough Product Licenses for each ThinManager Ready thin client.
Hardware
- Establish the IP addressing scheme for the thin clients. ThinManager Ready thin clients can use Static IP or DHCP. ThinManager Compatible thin clients need to use PXE boot.
- If using Static, open the IP Address menu on the thin client and list the IP address of the thin client and the ThinManager Server.
- If using DHCP, configure Option 066 to list the IP address of the ThinManager Server.
- If using PXE Boot, enable PXE boot by selecting Manage>PXE Server to launch the PXE Server wizard.
- Attach the terminals to ThinManager by either:
- Turning on the terminal and selecting the "Create New Terminal" option when the offline terminals are listed.
- Pre-creating the terminals in ThinManager and selecting the proper terminal name when the terminal is turned on and offline terminals are listed.
Results
- Step 1: The clients will connect to the ThinManager Server and download the firmware and configuration.
- Step 2: The configuration will send them to the terminal server to login and start a session.
Pages in category "Installation"
The following 4 pages are in this category, out of 4 total.
