|
If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201. |
Difference between revisions of "Ports"
(→TCP 5900) |
|||
| (34 intermediate revisions by 5 users not shown) | |||
| Line 3: | Line 3: | ||
==UDP 67== | ==UDP 67== | ||
| + | Protocol : DHCP | ||
| + | |||
IP Address Assignment -- Used by the PXE Server (if using PXE boot) (ThinManager 5.0 and later). | IP Address Assignment -- Used by the PXE Server (if using PXE boot) (ThinManager 5.0 and later). | ||
==UDP 69== | ==UDP 69== | ||
| − | [http://en.wikipedia.org/wiki/Trivial_File_Transfer_Protocol TFTP] | + | Protocol: [http://en.wikipedia.org/wiki/Trivial_File_Transfer_Protocol TFTP] |
| + | |||
| + | Used to TFTP the firmware and/or [[modules]] to ThinManager Compatible thin clients. (ThinManager 5.0 and later). Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for details. | ||
| + | |||
| + | ThinManager 10 includes a version of TFTP called "Firewall Compatible TFTP", that uses only port 69. | ||
==TCP 1494== | ==TCP 1494== | ||
| + | Protocol: ICA | ||
| + | |||
Citrix -- Used by the ICA protocol (if using ICA instead of RDP). | Citrix -- Used by the ICA protocol (if using ICA instead of RDP). | ||
==UDP 1758== | ==UDP 1758== | ||
| − | + | Protocol: Multicast TFTP | |
| + | |||
| + | Used if MultiCasting is enabled in ThinManager.<br> | ||
| + | This port is configurable by: | ||
| + | *Double clicking on your server name to bring up the [[ThinManager Server Configuration]] Wizard | ||
| + | *Click Next until you come to the Multicase Configuration page | ||
| + | *Click Advanced to bring up the Advanced Options | ||
==TCP 2031== | ==TCP 2031== | ||
| − | Configuration -- Used to pass the configuration from the ThinManager Server to the | + | Protocol: Propriety |
| + | |||
| + | Configuration -- Used to pass the configuration from the ThinManager Server to the terminal (connection initiated from thinclient). | ||
| + | Also used for automatic [[Synchronization]] between ThinManager servers. | ||
| + | |||
| + | ==TCP 2376== | ||
| + | Protocol: Docker Containers | ||
| + | |||
| + | Containers: This port is needed to allow an encrypted channel for the terminal to connect to a Container Host to display the Container content. | ||
| + | |||
| + | ==TCP 3268== | ||
| + | Protocol: LDAP | ||
| − | + | Used for domain authentication using the Lightweight Directory Access Protocol (LDAP). | |
| − | |||
==TCP 3389== | ==TCP 3389== | ||
| − | RDP | + | Protocol: RDP |
| + | |||
| + | Used by the RDP protocol (if using ThinManager v2.4.1 or later). Connection is initiated by thinclient to Remote Desktop server. | ||
| + | |||
| + | ==UDP 4011== | ||
| + | Protocol : DHCP | ||
| + | |||
| + | Used by the ThinManager PXE Service when a standard DHCP server is installed on the same computer as ThinManager. | ||
| + | |||
| + | This port is used when booting ThinManager Compatible PXE boot thin clients using the UEFI (Unified Extensible Firmware Interface) BIOS. (ThinManager 11) | ||
==UDP 4900== | ==UDP 4900== | ||
| − | TFTP - | + | Protocol: TFTP |
| + | |||
| + | Used to TFTP the firmware to ThinManager Ready thin clients. Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for [http://en.wikipedia.org/wiki/Trivial_File_Transfer_Protocol TFTP] details. | ||
| + | |||
| + | ThinManager 10 includes a version of TFTP called "Firewall Compatible TFTP", that uses only port 4900. | ||
==TCP 5900== | ==TCP 5900== | ||
| − | + | Protocol: Propriety Shadow Protocol | |
| + | |||
| + | Used for [[shadowing]] terminals (connection initiated from ThinManager UI directly to thinclient). This can be changed on the Shadow Configuration page of the [[ThinManager Server Configuration]] Wizard.<br> | ||
This port is configurable by: | This port is configurable by: | ||
| − | *Double click you server name to bring up the ThinManager Server Configuration Wizard | + | *Double click you server name to bring up the [[ThinManager Server Configuration]] Wizard |
*Selecting Next until you come to the Shadow Configuration page. | *Selecting Next until you come to the Shadow Configuration page. | ||
==ICMP== | ==ICMP== | ||
| − | Ping -- Used by WinTMC and Enforce Primary. | + | Protocol: ICMP |
| + | |||
| + | Ping -- Used by [[WinTMC]] and Enforce Primary. | ||
Latest revision as of 16:59, 18 February 2021
Contents
UDP 67
Protocol : DHCP
IP Address Assignment -- Used by the PXE Server (if using PXE boot) (ThinManager 5.0 and later).
UDP 69
Protocol: TFTP
Used to TFTP the firmware and/or modules to ThinManager Compatible thin clients. (ThinManager 5.0 and later). Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for details.
ThinManager 10 includes a version of TFTP called "Firewall Compatible TFTP", that uses only port 69.
TCP 1494
Protocol: ICA
Citrix -- Used by the ICA protocol (if using ICA instead of RDP).
UDP 1758
Protocol: Multicast TFTP
Used if MultiCasting is enabled in ThinManager.
This port is configurable by:
- Double clicking on your server name to bring up the ThinManager Server Configuration Wizard
- Click Next until you come to the Multicase Configuration page
- Click Advanced to bring up the Advanced Options
TCP 2031
Protocol: Propriety
Configuration -- Used to pass the configuration from the ThinManager Server to the terminal (connection initiated from thinclient). Also used for automatic Synchronization between ThinManager servers.
TCP 2376
Protocol: Docker Containers
Containers: This port is needed to allow an encrypted channel for the terminal to connect to a Container Host to display the Container content.
TCP 3268
Protocol: LDAP
Used for domain authentication using the Lightweight Directory Access Protocol (LDAP).
TCP 3389
Protocol: RDP
Used by the RDP protocol (if using ThinManager v2.4.1 or later). Connection is initiated by thinclient to Remote Desktop server.
UDP 4011
Protocol : DHCP
Used by the ThinManager PXE Service when a standard DHCP server is installed on the same computer as ThinManager.
This port is used when booting ThinManager Compatible PXE boot thin clients using the UEFI (Unified Extensible Firmware Interface) BIOS. (ThinManager 11)
UDP 4900
Protocol: TFTP
Used to TFTP the firmware to ThinManager Ready thin clients. Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for TFTP details.
ThinManager 10 includes a version of TFTP called "Firewall Compatible TFTP", that uses only port 4900.
TCP 5900
Protocol: Propriety Shadow Protocol
Used for shadowing terminals (connection initiated from ThinManager UI directly to thinclient). This can be changed on the Shadow Configuration page of the ThinManager Server Configuration Wizard.
This port is configurable by:
- Double click you server name to bring up the ThinManager Server Configuration Wizard
- Selecting Next until you come to the Shadow Configuration page.
ICMP
Protocol: ICMP
Ping -- Used by WinTMC and Enforce Primary.
