|
If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201. |
Ports
UDP 67
IP Address Assignment -- Used by the PXE Server (if using PXE boot) (ThinManager 5.0 and later).
UDP 69
TFTP -- Used to TFTP the firmware and/or modules to ThinManager Compatible thin clients. (ThinManager 5.0 and later). Standard TFTP implementations use a different source port after the initial TFTP request - see Wikipedia article for details.
TCP 1494
Citrix -- Used by the ICA protocol (if using ICA instead of RDP).
UDP 1758
MultiCast -- Used if MultiCasting is enabled in ThinManager.
This port is configurable by:
- Double clicking on your server name to bring up the ThinManager Server Configuration Wizard
- Click Next until you come to the Multicase Configuration page
- Click Advanced to bring up the Advanced Options
TCP 2031
Configuration -- Used to pass the configuration from the ThinManager Server to the terminal. Also used for Synchronization.
TCP 3389
RDP -- Used by the RDP protocol (if using ThinManager v2.4.1 or later).
UDP 4900
TFTP -- Used to TFTP the firmware to ThinManager Ready thin clients.
TCP 5900
Shadowing -- Used to shadow terminals. This can be changed on the Shadow Configuration page of the ThinManager Server Configuration Wizard.
This port is configurable by:
- Double click you server name to bring up the ThinManager Server Configuration Wizard
- Selecting Next until you come to the Shadow Configuration page.
ICMP
Ping -- Used by WinTMC and Enforce Primary.
