Welcome to the ThinManager Knowledgebase.
Additional knowledgebase articles can be found at Rockwell Automation Tech Support.

If you would like to speak with one of our engineers, please Submit a Question or give us a call at the phone number here. In North America, To route your phone support request directly to a technical support engineer, call toll-free 1-888-382-1583 or 1-440-646-3434, select Option 3 (Technical Support), then select Option 5 (More Options). When prompted, enter the ThinManager Direct Dial Code 201.

Difference between revisions of "Ports"

From ThinManager Knowledge Base
Jump to: navigation, search
(UDP 69)
 
(5 intermediate revisions by 3 users not shown)
Line 33: Line 33:
 
Configuration -- Used to pass the configuration from the ThinManager Server to the terminal (connection initiated from thinclient).  
 
Configuration -- Used to pass the configuration from the ThinManager Server to the terminal (connection initiated from thinclient).  
 
Also used for automatic [[Synchronization]] between ThinManager servers.
 
Also used for automatic [[Synchronization]] between ThinManager servers.
 +
 +
==TCP 2376==
 +
Protocol: Docker Containers
 +
 +
Containers: This port is needed to allow an encrypted channel for the terminal to connect to a Container Host to display the Container content.
 +
 +
==TCP 3268==
 +
Protocol: LDAP
 +
 +
Used for domain authentication using the Lightweight Directory Access Protocol (LDAP).
  
 
==TCP 3389==  
 
==TCP 3389==  
Line 38: Line 48:
  
 
Used by the RDP protocol (if using ThinManager v2.4.1 or later). Connection is initiated by thinclient to Remote Desktop server.
 
Used by the RDP protocol (if using ThinManager v2.4.1 or later). Connection is initiated by thinclient to Remote Desktop server.
 +
 +
==UDP 4011==
 +
Protocol : DHCP
 +
 +
Used by the ThinManager PXE Service when a standard DHCP server is installed on the same computer as ThinManager.
 +
 +
This port is used when booting ThinManager Compatible PXE boot thin clients using the UEFI (Unified Extensible Firmware Interface) BIOS. (ThinManager 11)
  
 
==UDP 4900==
 
==UDP 4900==
Line 43: Line 60:
  
 
Used to TFTP the firmware to ThinManager Ready thin clients. Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for [http://en.wikipedia.org/wiki/Trivial_File_Transfer_Protocol TFTP] details.
 
Used to TFTP the firmware to ThinManager Ready thin clients. Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for [http://en.wikipedia.org/wiki/Trivial_File_Transfer_Protocol TFTP] details.
 +
 +
ThinManager 10 includes a version of TFTP called "Firewall Compatible TFTP", that uses only port 4900.
  
 
==TCP 5900==
 
==TCP 5900==

Latest revision as of 16:59, 18 February 2021


UDP 67

Protocol : DHCP

IP Address Assignment -- Used by the PXE Server (if using PXE boot) (ThinManager 5.0 and later).

UDP 69

Protocol: TFTP

Used to TFTP the firmware and/or modules to ThinManager Compatible thin clients. (ThinManager 5.0 and later). Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for details.

ThinManager 10 includes a version of TFTP called "Firewall Compatible TFTP", that uses only port 69.

TCP 1494

Protocol: ICA

Citrix -- Used by the ICA protocol (if using ICA instead of RDP).

UDP 1758

Protocol: Multicast TFTP

Used if MultiCasting is enabled in ThinManager.
This port is configurable by:

  • Double clicking on your server name to bring up the ThinManager Server Configuration Wizard
  • Click Next until you come to the Multicase Configuration page
  • Click Advanced to bring up the Advanced Options

TCP 2031

Protocol: Propriety

Configuration -- Used to pass the configuration from the ThinManager Server to the terminal (connection initiated from thinclient). Also used for automatic Synchronization between ThinManager servers.

TCP 2376

Protocol: Docker Containers

Containers: This port is needed to allow an encrypted channel for the terminal to connect to a Container Host to display the Container content.

TCP 3268

Protocol: LDAP

Used for domain authentication using the Lightweight Directory Access Protocol (LDAP).

TCP 3389

Protocol: RDP

Used by the RDP protocol (if using ThinManager v2.4.1 or later). Connection is initiated by thinclient to Remote Desktop server.

UDP 4011

Protocol : DHCP

Used by the ThinManager PXE Service when a standard DHCP server is installed on the same computer as ThinManager.

This port is used when booting ThinManager Compatible PXE boot thin clients using the UEFI (Unified Extensible Firmware Interface) BIOS. (ThinManager 11)

UDP 4900

Protocol: TFTP

Used to TFTP the firmware to ThinManager Ready thin clients. Standard TFTP implementations use a different source port on the ThinManager server after the initial TFTP request - see Wikipedia article for TFTP details.

ThinManager 10 includes a version of TFTP called "Firewall Compatible TFTP", that uses only port 4900.

TCP 5900

Protocol: Propriety Shadow Protocol

Used for shadowing terminals (connection initiated from ThinManager UI directly to thinclient). This can be changed on the Shadow Configuration page of the ThinManager Server Configuration Wizard.
This port is configurable by:

ICMP

Protocol: ICMP

Ping -- Used by WinTMC and Enforce Primary.